All Installation Instructions for Kenmore Refrigerator 25344723100

Copper lines leaking freon

Removed the inside evaporator coil to do inside solder job, use torch to heat solder joints on the outside drier in order to remove it and install new drier. Soldered Heat exchanger line to drier and 1/4” copper line to compressor. Wrapped with new insulation wrap. Pulled a vacuum on system and then charged with 4.4 ounces of 134a freon. Works like a champ again!

Parts Used:

HEAT EXCHANGER

Filter - Drier

Mike from Jacksonville, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

broken door bin

very simple--pull out damaged bin then snap new bin in. takes all of approximately 10-15 seconds.

Parts Used:

Refrigerator Door Shelf Bin

VIRGIL from JERSEYVILLE, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Noisy condenser fan

Remove lower cardboard refrigerator panel. Carefully pull existing cracked fan blade off of the motor shaft and replace with new fan blade. Reinstall cardboard panel.

Parts Used:

Fan Blade

Ben from FRANKLIN, TN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Defrost Timer

The old defrost timer started making a screeching noise (probably bearings going out). The replacement part was a cinch to install. When I initially spoke to a PartsSelect person, they said the part number I gave them was not consistent with my old '94 Tappan Freezer. They were able to still find the proper replacement part number. The video that was on-line helpful also.

Parts Used:

DEFROST TIMER

DAVE from LOS RANCHOS, NM
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

2 of 4 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broken tab on shelf

Set new shelf in place and push down. Very easy!

Parts Used:

Refrigerator Door Shelf Bin

Wiliam from BINGHAMTON, NY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

The door shelf bin had broken.

I took the part out of the box, opened the refrigerator and snapped the door shelf bin in place. Job done! Less than 5 minutes. I'm a 68 yr old women and did it by myself. Thank you. The price was excellent and I will definitely use your services again if/when needed.

Parts Used:

Refrigerator Door Shelf Bin

MARGARET from FOLSOM, LA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Old part broke

The original part broke. The plastic attachment end of the part snapped off. The new part was easy to attach.

Parts Used:

Tall Bottle Retainer

W Howard from KEENE, NH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

My son open the refrigerator door and the ketchup was on the top of the shelf and it broke it off

Just snapped it in it was that easy

Parts Used:

Refrigerator Door Shelf Bin

Cindy from South St Paul, MN
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 person found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Refrigerator Door Shelf Bin broke

I simply removed the old broken shelf and clipped in the new one. Not a major project however the company went above and beyond due to a problem with the delivery of the part. I live in an 1,800 unit condo. Packages are delivered to a kiosk for pick up. FedEx showed the package was delivered but I did not receive it. When I called PartSelect to advise of the problem, they immediately refunded me for the part I didn't receive and sent another one which I received in a few days. I found the company to be very reliable and customer friendly. I will use them again should the occasion arise.

Parts Used:

Refrigerator Door Shelf Bin

David from MIAMI BEACH, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Old tray broke several years ago.

Installed in a snap !!!!

Parts Used:

Refrigerator Door Shelf Bin

Charles from ENGLEWOOD, TN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

No problems

I had no problems. Screws arrived sooner than expected. It was a very simple installation. Very pleased with both the product and service.

Parts Used:

Screw

Nancy from LEHIGH ACRES, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench (Adjustable)

2 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

Broke glass on crisper

Just slide glass in. Very easy.

Parts Used:

Crisper Glass Shelf Insert

Carlene from DOERUN, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins

1 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Thank you for voting!

A set scew was ordered twice.

The first order arrived in a huge box and there was no scew to be found, the box had wholes in it. I was given a refund and told to order again.

The repair did not happen and the set screw which was actually recieved the second time was returned because it was the wrong size.

Parts Used: