Models > 24688W0 > Instructions

24688W0 General Electric Range - Instructions

All Instructions for the 24688W0
286 - 300 of 365
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Oven wouldn't heat up
Turned off breaker to oven, unscrewed baking element from oven removed old element. Replaced new element and turned back on.
Parts Used:
Bake Element
  • Rob from Mc Dermitt, NV
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Baking Element Burnt to Pieces
Repair was as easy as explained in the video. Definitely disconnect power or turn off breaker; baking element connection is live!!!!
Parts Used:
Bake Element
  • christopher from tempe, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
Oven Door would not open all the way
Well after fighting with the door for a month, i went on this site and using their information, i found the model number (in the process i found the receipt for the oven and found out it was 20 years old still looks and works like new. Pulled the door up and off the hinges, removed the drawer, saw the spring was in the middle hole, removed three screws pulled out old hinge. Installed new hinge, 3 screws and the spring. put the door back on and wow it worked! Thanks!
Parts Used:
Hinge with Roller - Right Side
  • john from bristol, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Shaft for burner control knob broke off
I flipped breaker off for electic and confirmed that power to the stove was off. I removed the 2 screws holding the control unit in place. Carefully removed all knobs and buttons and pryed the cover for the control unit off. I then removed old part, removed the wired and clipped wires to the new unit. Put cover back on - has some difficulty getting the panel back in place to line up the screws. But after a couple of attempts, was able to line up unit and put screws in place to secure. Replaced all knobs. Turn breaker back on and cooked lunch. Very easy job. Most difficult part was getting panel back in position. I would watch alignment more carefully before I removed in next time. Easy home repair for Women...not sure about my man?
Parts Used:
INFINITE HEAT SWITCH KIT
  • Carol from Hamilton, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bake element was broken
Removed 1/4 in self tapping screws, pulled out bake element , unplugged terminals, reversed process for install easy easy
Parts Used:
Bake Element
  • Kenneth from Sullivan, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Baking element went out in oven
Easy...found the model number, called the number and part was delivered in less than two days! Unscrewed two screws, unplugged two terminal wires put on new element plugging two terminal wires in and screwed two screws in......wahhlaaahhh...EASY!
Parts Used:
Bake Element
  • Chaz from Bethany, OK
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
The Oven Element Burnt Up And Cracked.
It was great to read the other comments about replacing the element part. When I pulled out the wire others said they pull back in to the insulation and you can loose them. So when the yellow wires came out after getting the screws loose I put those potato chip clips on the wires so they would not pull back in and get lost. I certainly didn't want to pull the oven out and go in from the rear. I turned the main breaker off before attempting anything. The screws would not budge till I sprayed them with the wd40. I am a woman and did this with the help of my 19 yr. Old son. The hardest part was removing the screws. Removed the racks and took off the door. This made it easier to reach the screws. It was very easy to replace once we got the old one removed. The part arrived in 3 days from ordering. Excellent customer service. Will use again.
Parts Used:
Bake Element
  • Teru from Colorado Springs, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
The oven element burned in half
After removing two screws the old part slid out. Removed the electrical connectors. Replaced with new part. Slid part back in the screws were reconnected. Visions of purchasing a new stove disappeared. My wife was thrilled.
Parts Used:
Bake Element
  • Douglas J from Pine River, MN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
Bake element in oven burned out.
Turned off breaker. Undid two screws. Removed old element from contacts. Connected new element. Slid into place. Screwed in two screws. Turned power back on. Done! Working great at very little time, effort and cost.
Parts Used:
Bake Element
  • Edward from Hampton Cove, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Bake element was burned out
Removed two screws. Unplugged two wires. Removed the bake element. Plugged the two wires into the new bake element. Replaced the two screws. Problem solved.
Parts Used:
Bake Element
  • Mike from Winona, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Oven element caught on fire, because of food in the bottom of oven.
Used a nut driver to remove two screws from old burned out element. Replaced the new element you sent. Thanks for the prompt delivery, I received the new part in just a few days.I will remember you the next time I have a problem of that nature.
Parts Used:
Bake Element
  • Dale from Zachary, LA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Hinge on oven door had a broken pulley.
Very easy job. Removed the 3 screws from the oven body, and slid the hinge out of the door. Slid in the new hinge, replaced the screws, and it was done. Very easy, wish I had done it sooner. Finding the part was easy, using the parts diagram. Rep was nice and confirmed the right part. Shipping was fast, and price was reasonable.
Parts Used:
Hinge with Roller - Left Side
  • James from Denhim Springs, LA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
heating element melted and started to burn
It was as easy as mentioned on the website. The oven works perfectly and I am pleased that I did not need to call a repair person for such a simple repair. The part took less than 2 days to arrive which was amazing. I am very pleased with this company and their service and information.
Parts Used:
Bake Element
  • Margaret from Arnold, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
replace bake lelment
as per inatructions
Parts Used:
Bake Element
  • Joseph from Murrells Inlet, SC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set
Was this instruction helpful to you?
Thank you for voting!
Burnt lower element in oven.
So easy a caveman could do it!!
Parts Used:
Bake Element
  • Len from Huntsville, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 24688W0
286 - 300 of 365
Back to Top