All Installation Instructions for General Electric Range 24588L0

rht. front element would not heat properly

I read parts select instructions and i was done in less than 30 minutes. Since 1988, this is the 1st. part that I had to replace. I now have parts select on my favorites list.

Parts Used:

INFINITE HEAT SWITCH KIT

Rod from Huron, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Oven not heating although the broiler did heat.

Turn off range circuit breaker; remove and save nuts holding old element; disconnect old element from wires; connect new element to wires; tighten new element in using the nuts you have kept. Turn on the breaker, turn on your oven. WARNING: INSULATION SHOULD BE KEPT AWAY FROM CONNECTED WIRES, OTHERWISE IT BURNS WHEN OVEN IS TURNED ON AND YOU WILL HAVE TO UNDO THE NEW ELEMENT AND PUSH THE INSULATION OUT OF THE WAY AND THEN REDO THE NEW ELEMENT.

Parts Used:

Bake Element

Bobbie from University Place, WA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver

Was this instruction helpful to you?

Thank you for voting!

element broke in 2 pieces

removed broken element and installed new element when received from UPS -very simple -

Parts Used:

Bake Element

Nancy from Louisa, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

element heat wouldn vary

slid the range away from wall. disconnect power. removed back,compared switches and marked wires.installed new switch and wires.the adapter for the control knob was a problem it left the knob out futher than original i had to modify the plastic adapter and got it close enought! the most time spent was cleaning up the floor before putting the range back.

Parts Used:

INFINITE HEAT SWITCH KIT

Leonard from Winter, WI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Plastic Roller on hinge broke in half

Following the repair video made the job very easy and quick, about a 5 minute repair. Wife says oven door never worked better. Thanks a lot for all your help.

Parts Used:

Hinge with Roller - Right Side

Dan from Granville, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

one oven hinge broken

It took longer to watch the video on how to replace the hinges than it did to replace them. Simple and easy. Video knocked it out of the park for ease. And now the oven door works great! thanks!!!! Video suggested if you're replacing one side do both, couldn't agree more.

Parts Used:

Hinge with Roller - Right Side