24488W0 General Electric Range - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
broken element
shut off power turned out two screws pulled out element pulled off wire connecters. connected wires to new element and put back in slots put screws back in. only took 10 minutes to fix.
Parts Used:
-
sandy from saint clair, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
Old element blew out.
Stuck my head in oven and replaced element. Not bad for an 80 year old Geezer.
Parts Used:
-
David from Hill City, SD
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
Cooking element in bottom of oven
I removed the two screws in the back of oven with a nutdriver to remove the element. New element was inserted,nuts tightened and that was it! Very easy and simple.
Parts Used:
-
Marilyn from Houlton, ME
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Bake element burned out
Shut the power off to the oven. Removed the two screws holding the element to the back wall of the oven. Pulled out and disconnected the old element. Connected the new element, secured with screws and restored power to the oven. Easy as that. Will be using Parts Select for all my repair needs from now on. Thanks.
Parts Used:
-
Ty from Panacea, FL
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Bottom heating Element melted in half.
I followed the wonderful instructional video that was emailed to me after the part. Very easy and efficient.
Parts Used:
-
Daniel from Phoenix, AZ
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Broken roller in hinge
Slipped off the front door. Removed 3 screws & spring. Replaced with new part. Hooked the spring & secured with the three screws.
Parts Used:
-
David from Richmond, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
element burnt out
-
jeanne from augusta, ME
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Oven door hinge wheels were worn out and grinding.
Followed the online video. Unhooked the springs, removed the 3-screws on each side. Installed the new hinges in reverse order. Used the wear marks on the old springs to ID and place the new springs in the holes on the new hinges. Great company to deal with....never a surprise, Great communications letting you know that your parts were on order and then again that they were shipped with shipping info and numbers to call with any questions. The best part has been that the parts drop right in everytime I have ordered from them!!!! Thanks Dan!
Parts Used:
-
Dan from Beloit, WI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Bake element burnt out
I watched your video and then did it the way your repair man did it. You guys are great! Thank You!
Parts Used:
-
christopher from benton, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
oven baking heating element failed
used a nut driver and needle nosed pliers to remove the old element and install the replacement.
Parts Used:
-
gregory from south haven, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Was this instruction helpful to you?
Thank you for voting!
Bottom element out
Easy once discovered that had to bend element in back do would not short out on back cover.
Parts Used:
-
Mona from Monroe, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
oven heating element sparks
I looked at this sight and it looked like replacing the oven lower heat element would be easy. I received the part the day after I ordered it. I unplugged the oven, removed two screws from the back panel, took the old element out and put the new one in. Oven works great, it was easy.
Parts Used:
-
Justin from Yorkville, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Bake element burned out
If you can repair from back of stove so much easier than inside. Local store wanted 43.00 purchased from part select 29.00. Great prices and delivery time, had next day.
Parts Used:
-
kathleen from theodore, AL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
burnt out element
-
Dennis A. from New Canton, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
Element burnt into.
Removed the old element and replaced it with the new element, It was simple and quick. We received the part in one day, and the cost was half that if bought from sears.
Parts Used:
-
John from west terre haute, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!