1CWTW5700SW0 Whirlpool Washer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Water Pump Leaks
It was really easy, just follow the video. The washer machine sounds like new now.
Parts Used:
-
jose from mnroe, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Agitator spun freely both directions
Trying to pull of the agitator top section with much difficulty it finally snaped and all the agitator pieces went flying. After watching installation videos I replaced the old worn out parts with new parts (cam kit) etc. and put the agiator back together and installed it with little difficulty. A few minutes later I was doing laundry and the agitator cleaned my cloths better than it had before I replaced the parts. Everything works great and I am very happy with my experience with Partselection.
Parts Used:
-
Daniel from Puyallup, WA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Machine fills then just hums
After alot of helpful advise from you guys I replaced coupling water pump clutch, and the problem was still their. Then I tested motor capacitor and it appears dead. So I should receive new one tomorrow and hopefully success! I turned machine over and oil leak..so that's where the string with hose and air needle come in handy to put 90weight oil in through breather hole in gear case.
Parts Used:
-
Kevin from Center Point, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:More than 2 hours
-
Tools:Pliers, Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Agitator was not working
-
William from Middletown, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Upper section of agitator worn out and noisy.
I removed the old agitator, cleaned any debis and placed the new part over the spindle. I tightened the nut and placed the separator part and the fabric dispensor on the new part and all was complete. After viewing the video I was expecting to have to assemble the ratchet part but the agitator came with that assembly already assembled and in place. The part shipped quickly and arrived in perfect condition.
Parts Used:
-
David from Morrow, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!