Models
>
1CWTW4815EW1
1CWTW4815EW1 Whirlpool Washer - Overview
Sections of the 1CWTW4815EW1
[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Washer Drive Pulley
PartSelect #: PS10057144
Manufacturer #: W10721967
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$54.38
In Stock
Drive Belt
PartSelect #: PS11747978
Manufacturer #: WPW10006384
The main drive belt is designed to ride on the pulley until the basket gets up to speed.
$19.71
In Stock
Screw, 8/18 x 3/8
PartSelect #: PS11746840
Manufacturer #: WP90767
This screw is sold individually.
$5.42
In Stock
Washing Machine Door Lock Assembly
PartSelect #: PS12704713
Manufacturer #: W11307244
$139.23
In Stock
Washer
PartSelect #: PS11742027
Manufacturer #: WP3949550
This part goes on the agitator retaining bolt.
$7.69
In Stock
Fabric Softener Dispenser
PartSelect #: PS381197
Manufacturer #: 63580
Use this dispenser for your direct drive washing machine.
$25.70
In Stock
Touch-Up Paint - White
PartSelect #: PS385132
Manufacturer #: 72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.00
In Stock
D-Shaped Knob Insert
PartSelect #: PS11746209
Manufacturer #: WP8536939
This insert is sold individually. Knob not included. Knob is sold separately.
$11.10
In Stock
Hose Clamp
PartSelect #: PS11740613
Manufacturer #: WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
$11.10
In Stock
Lid Hinge Mounting Screw
PartSelect #: PS11748588
Manufacturer #: WPW10119828
Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.
$11.80
In Stock
Drive Block - 2 5/16 Inch High
PartSelect #: PS11741977
Manufacturer #: WP389140
This part is for large capacity belt drive and direct drive appliances.
$23.77
In Stock
Questions And Answers for 1CWTW4815EW1
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charle
October 13, 2022
Need a drive motor pully not one that bolts on
For model number 1CWTW4815EW1
Hey Charle, thank you for your inquiry. We have researched your model and found that the drive motor pulley does not come separately. You may need to replace the drive motor, part number PS11757089. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Drive Motor
$271.12
In Stock
Nigel
May 7, 2023
I have had this washer for some time. Today I put it on as usual by pressing the button, the green light comes on as usual but nothing happens. No water is coming into the tub. I checked the water inlet hose to make sure the line has water, I made sure the little latch on the lid is downwards but nothing. The green light I solid, it's not blinking.
For model number 1CWTW4815EW1
Hi Nigel, thank you for reaching out. The issue is probably due to the water inlet valve, part number PS12349268. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
VALVE
$120.93
Special Order
Hassan
February 26, 2020
Has
Clicking on wash cycle. would not go to rinse cycle
For model number 1CWTW4815EW1
Hello Hassan,
Thank you for your question. Our sources suggest replacing the control board under part PS12704684 for your model to fix the cycling issues. We hope this helps.
Was this helpful?
Thank you for voting!
Related Parts:
CNTRL-ELEC
$379.22
Special Order
John
November 8, 2022
my washer wont go pass rinse. I have tried setting knob to 12 o clock position, un plug, rotate knob 360 ccw. cw 3 clicks, ccw 1 click, cw 1 click.
all in less then 3 sec. I swear this worked once. but it does not work now.
For model number 1CWTW4815EW1
Hello John, Thank you for your inquiry. We have researched the model number you have provided and we would recommend checking the following parts to fix your issue: the door lock assembly, the water inlet valve, the cycle selector switch, the water pressure hose, and the control board. Check the hose for any visible damage or clogs, and examine the control board for any visible damage or loose connections. You can test the other parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. Good luck with your repair and if you need assistance with placing an order, please do not hesitate to call our customer service, open 7 days a week to help you. We look forward to hearing from you
Was this helpful?
Thank you for voting!
Related Parts:
CNTRL-ELEC
$379.22
Special Order
Water Pressure Hose - Cut-to-Fit
$62.13
In Stock
Selector Switch
$102.60
In Stock
VALVE
$120.93
Special Order
Washing Machine Door Lock Assembly
$139.23
In Stock
- < Prev
- 1
- Next >
Common Symptoms of the 1CWTW4815EW1
[Viewing 11 of 11]Will not agitate
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Spins slowly
Fixed by
these parts
these parts
Show All
Burning smell
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Lid or door won’t close
Fixed by
these parts
these parts
Show All
Does not dispense fabric softener or detergent
Fixed by
these parts
these parts
Show All
Shaking and Moving
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Spinning Issues
Fixed by
these parts
these parts
Show All
Locking Issues
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Noise on bottom of Washer louder as time went on. 1 1/2 years
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch
... Read more
and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
Read less
Parts Used:
-
Jerry from WALLA WALLA, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Socket set
83 of 112 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No fabric softener dispenser
Pop the center cap off the agitator and snap the dispenser in. Easy as 1-2-3.
Parts Used:
-
Dennis from Port Orchard, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
51 of 69 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Scratches in Surface
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Parts Used:
-
Michelle from Richardson, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
64 of 125 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!