1CLSQ9549PG1 Whirlpool Washer - Instructions

Removed the cap and the unit that held the cogs or dogs. Replaced and reassembled. Took about 5 minutes.

The washer was going to be thrown away because of the leak, a new one was purchased. I said I would take the old washer and look into repairing it.I went online and saw a video on how to replace these defective parts, upon seeing how quick and easy this repair could be made, paired with the extremely small expense for parts ( 48.00 including shipping!), I chose to repair the washing machine. After the repair was completed, I donated the machine to a friend and spiritual advisor, an Orthodox Bishop.

Pop the top of the agitator off, 3/8th socket to remove the bolt holding the entire Agitator assembly, pull straight up to remove the entire agitator assembly, remove agitator dog assembly, pull plastic retainer holding agitator dogs in, replace agitator dogs, replace plastic that holds them and just put the thing back together. If it takes more than ten minutes you must have stopped for a beer break

I had previously verified the water leak coming from the washer water pump. This was prior to coming to your web-site looking for the part. I thought it was great the way I was directed to finding the part needed by the problem indicated, which directed me to the water pump 1st thing. I was also sent a instructional video on how the repair is made. This impressed me so much I shared it with one of my sons who volunteered to help with the repair. I'm a HVAC service tech and not use to having that much support. Greatfull for all your company's helpful service. I'll be sure to recommend as well as be a return customer. Sincerely, Dave Evans

took 5 minutes to repair just read direction

We followed the step by step video that you had posted for those parts. It is now working wonderfully. The repair man had told us it could not be repaired. Thank you so much for having these do it yourself instructions.

thought at first it was the drain hose then found out it was the direct drive water pump, video was great~! had no clue it was that easy, up until i put the cover back on the front of the washer machine, wasnt as easy as i thought, but after 30mins of cursing i managed to get it back on, washer runs great with out a drip, very happy!!! thanks partselect couldnt have done it without u !!!

Followed the video did not need to tilt machine over. Layed on floor it was more comfortable. The most difficult part was putting back on the tension band on top that's because I got a little tired on the food. Thanks for all your help. I bet I saved over $250.00 if a service tech came to fix this. You guys are the best

Took the water softener thing off, then there is another cover you just pull up on and it comes right out. pull the thing that has the agitator directional cogs ouy and replace them. Put it all back and you are done

real easy i follow your video step by step those video are great txs,.

Once you take the housing off it's only two clips to remove the water pump from the motor, then two screws and two more clips to remove the motor itself. One issue I ran into was the new coupling was hard to put on, so the first time I did I overheated the motor because it was binding (was also very hard to get the motor back on). After taking it apart again, and slightly tapping both couplings with a hammer the motor went on very easy and washer works like a champ!

Found this web site after reading forums on slow spins and I determined it was a clutch problem. Ordered the clutch from "Part Select", watched the 19 minute video (excellent) on changing out a clutch from this website. After 1.5 day delivery, I installed per video. Very pleased, thank you; Dave

I was very happy the part arrived very fast and just what we needed, and service was super.. We took the old pump off slipped the new one into the slot and hooked the clips back on it and tighted it up and plug the washer back in and filled with water and it drained... We started doing laundry right away, and so far so good... Tired to leave a review but it won't let us into the site, but we would use the same company to order from again, thank you so much...

Removed the fabric softner at the top of the agitator (needed a screw driver to pry it loose) and reached in to grab the barrier with my hand and pulled it out, very simple to do.When I put the new one in I put some liquid soap on the gasket and it snapped right into place.Very easy to do, all is well now, thanks Part Select.

The repair video was great. I decided not to remove the outer cover as there is room to get to the pump if the washer is tipped back. The pump was easy to fix with the exception of the root cause of the failure. There was water getting to the pump shaft and over time it rusted and expanded in the pump housing causing it to split and leak. Once the old pump was removed, a file was needed to reshape the drive shaft to allow the new pump to be installed. Not bad on a 16 year old washer!