Models > 14788L0

14788L0 General Electric Range - Overview

Get Parts and Repair Help for 14788L0

If you know the range repair part you need, you can browse the list of all parts on the 14788L0, or you can search by name or part description. You can also find your part by where it is located on the 14788L0 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 14788L0 parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$73.82

Round Style Oven Igniter

Be very careful when handling this igniter as it is very fragile.This igniter has a range of 2.5 to 3.0 amps. Note: This will not replace the flat style igniters. Also known as bak...

Order within the next 6 hrs and your part ships today!
$99.32

Oven Sensor

This sensor detects the temperature within the oven cavity.

Order within the next 6 hrs and your part ships today!
$30.45

Hinge with Roller - Right Side

This hinge is located on each side of the oven door.

Order within the next 6 hrs and your part ships today!
$36.09

Hinge with Roller - Left Side

This hinge is located on each side of the oven door

Order within the next 6 hrs and your part ships today!
$17.95

Broiler Pan - Large

Includes the pan and grate.

Order within the next 6 hrs and your part ships today!
$2.79

Single Screw Only

Sold Individually. This only comes with 1 screw, not the 4 pictured above.

Order within the next 6 hrs and your part ships today!
$26.48

Double Drip Pan

This double drip pan can be used for either the left or right hand side of the stove top.

Order within the next 6 hrs and your part ships today!
$28.20

Rear Drawer Glide

Also called Rear Block.

Order within the next 6 hrs and your part ships today!
$4.48

SCREW

Order within the next 6 hrs and your part ships today!
$3.00

Screw

Sold Individually.

Order within the next 6 hrs and your part ships today!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

No ignition

  • Customer: Mark from Upland CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 540 of 563 people found this instruction helpful
Unplug the oven.
Open the oven door.
Remove the racks.
Remove the two screws that hold the oven floor; they are located toward the back.
Remove the oven floor pan.
Remove the screw holding the heat shield/dispenser.
Remove the heat shield/dispenser.
Untwist the ceramic wire caps on the two igniter wires.
Remove the two... read more

broiler works, bake oven does not work.

  • Customer: Robert from Hebron CT
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 527 of 700 people found this instruction helpful
Your website help me troubleshoot the problem and locate the part. Part was delivered the next day. Following the instructions that others on your website had provided, the repair was quick and SUCCESSFUL.
Gas will not flow if the igniter is bad. Gas will only flow if the igniter heats up the internal bimetal strip which in turn, allows gas to flow t... read more

Oven igniter failed to heat up and ignite the gas burner.

  • Customer: Paul from Santa Rosa CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Socket set
  • 311 of 465 people found this instruction helpful
Before starting it's a good idea to disconnect the electricity and turn the gas valve off behind the stove.

Next, uncrew the two finger-screws at the back of the oven that hold the porcelain & steel drip plate in. It comes out if you push it towards the back of the oven and lift it out. This reveals the burner and the cylindrical igniter attac... read more