I wish this was longer...it's only about 6", barely enough to have the oil flow past the metal plate of the riding lawnmower. I'm going to figure out a way to make a permanent extension something like this video would be SO much better https://www.youtube.com/watch?v=G9ZVoeqr6R8&t=79s
Pliers, Socket set, Wrench (Adjustable), Wrench set
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
upper transmission belt cracked bad
Removed battery, then battery hanger brackets. Removed the tension spring from under side of seat. That was a little tuff to do. put a long phillips screw driver through transmission pulley. put a 7/8 box wrench on pulley nut and removed it. took old belt off and installed new one. Reversed order of removal. Getting the tension spring back into the bracket hole was a little tricky. I used a pair of long needle nose pliers to re install the spring. cut my yard and I'm a happy camper !!!!!!!!!!!!!!!!!!