Models > 13A-325-190

13A-325-190 MTD Lawn Mower - Overview

Sections of the 13A-325-190

[Viewing 1 of 1]
Diagram and Parts List for MTD Lawn Mower
Keep searches simple, eg. "belt" or "pump".
TT Screw 1/4-20 x 0.5 – Part Number: 710-0599
TT Screw 1/4-20 x 0.5
PartSelect #: PS9298768
Manufacturer #: 710-0599
$4.44
  In Stock
Jamlock Nut, 3/8-16 – Part Number: 712-0266A
Jamlock Nut, 3/8-16
PartSelect #: PS9299545
Manufacturer #: 712-0266A
The Jamlock Nut is a 3/8-16 inch metal nut which can be installed using a socket or wrench set. It's used to secure and lock parts in place. If the part is damaged and comes loose it should be replace...
$3.99
  In Stock
Brake Puck (Sold Individually) – Part Number: 917-0678
Brake Puck (Sold Individually)
PartSelect #: PS9165951
Manufacturer #: 917-0678
When the brakes are applied, this brake puck presses against the brake disc in your lawn equipment to help slow down or stop it. The brake puck is in the brake assembly, which might be located near th...
$7.91
  In Stock
Solenoid – Part Number: 925-1426A
Solenoid
PartSelect #: PS9310446
Manufacturer #: 925-1426A
$28.38
  In Stock
Washer-Lock 5/16 – Part Number: 936-0119
Washer-Lock 5/16
PartSelect #: PS9311087
Manufacturer #: 936-0119
This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent ...
$4.95
  In Stock
Grease Benalene 920 8 Oz – Part Number: 737-0300A
Grease Benalene 920 8 Oz
PartSelect #: PS9119538
Manufacturer #: 737-0300A
$34.97
  In Stock
Flange Bearing – Part Number: 741-0516B
Flange Bearing
PartSelect #: PS9112939
Manufacturer #: 741-0516B
$6.50
  In Stock
Fl-Idler Pulley 2.75" O.D. – Part Number: 756-04224
Fl-Idler Pulley 2.75" O.D.
PartSelect #: PS9303877
Manufacturer #: 756-04224
$28.57
  In Stock
Int. Cotter Pin 5/16" Dia. – Part Number: 914-0104
Int. Cotter Pin 5/16" Dia.
PartSelect #: PS9164893
Manufacturer #: 914-0104
The Int. Cotter pin 5/16" is an individually sold, silver metal Cotter pin measuring 5/16 x 34. It can be used to secure and lock parts in place, requires pliers to install, and is rated as "Easy" to ...
  No Longer Available
Fl-Idler Pulley 3.5" O.D. – Part Number: 756-0627D
Fl-Idler Pulley 3.5" O.D.
PartSelect #: PS9132692
Manufacturer #: 756-0627D
$32.92
  In Stock
Hex Nut 5/16-18 – Part Number: 912-3010
Hex Nut 5/16-18
PartSelect #: PS9309225
Manufacturer #: 912-3010
$3.29
  Special Order
Ignition Switch: 5 Pin – Part Number: 925-0267B
Ignition Switch: 5 Pin
PartSelect #: PS9310387
Manufacturer #: 925-0267B
This OEM 5 Pin ignition Switch is a silver, steel, individually sold part. It can be installed using a wrench and screwdriver, and has been rated as Easy to install. The part attaches to the dashboard...
$38.37
  In Stock
View More
Back to Top

Questions And Answers for 13A-325-190

Be the first to ask our experts a question about this model!

Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it does not make the slight howl sound.
Read less
Parts Used:
Grease Benalene 920 8 Oz
  • LISA M from BATESVILLE, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
5 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More
Back to Top