11098762791 Kenmore Washer Dryer Combo - Parts

Agitator Directional Cogs

★★★★★

★★★★★

(356)

This kit is used for replacing the agitator directional cogs (Agitator Dogs, Agitator Repair Kit, Washer Agitator Dogs, Agitator Dog Ears). The agitator is what creates the thrusting motion in your wa... Add to cart

Dryer Cycling Thermostat

★★★★★

★★★★★

(97)

This thermostat (Dryer Operating Thermostat, Dryer Cycling Thermostat, Cycling Thermostat, Dryer Thermostat) is used to maintain a temperature of 155 degrees in the dryer drum. The internal bias heate... Add to cart

Door Catch Kit

★★★★★

★★★★★

(125)

This part replaces your appliances latch (Door Latch Kit, Door Catch, Dryer Door Latch Kit). On your appliance you will find both a strike and a catch. The strike is mounted on the body of the dryer, ... Add to cart

Suspension Spring

★★★★★

★★★★★

(27)

The suspension spring supports the outer tub and keeps the tub steady during loads that could cause an unbalance. If this part breaks, is worn down or has stretched out and lost its spring, it could c... Add to cart

Idler Pulley

★★★★★

★★★★★

(117)

This Idler Pulley includes the tri-ring and gasket and everything included here is manufacturer-certified. This part maintains correct tension on the drive belt in order to spin the drum properly. If ... Add to cart

Water Inlet Valve with Mounting Bracket

★★★★★

★★★★★

(132)

The water inlet valve on your washing machine is used to fill the tub with cold, warm, or hot water for the wash and rinse cycles. This part could have either a blue or green-colored valve body. There... Add to cart

Dryer Drum Support Roller

★★★★★

★★★★★

(38)

This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d... Add to cart

Multi Rib Belt

★★★★★

★★★★★

(49)

The Drive Belt is a 93 1/2" belt which wraps around the dryer drum to allow tension and movement. If broken the dryer will not turn properly, or there may be loud noises. The part is rated as "medium"... Add to cart

Roller Support Tri-Ring

★★★★★

★★★★★

(5)

If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul... Add to cart

Thrust Washer

★★★★★

★★★★★

(2)

This genuine OEM washer has a 3/4 inch outside diameter. This thrust washer can be used on most makes and models of dryers. A complete list of compatible dryers is available below. The washer is found... Add to cart

Agitator Bolt

★★★★★

★★★★★

(10)

This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16". Add to cart

Seal, Inner Cap

★★★★★

★★★★★

(11)

This is an inner cap seal, but may also be known as an O-ring, and it is a part for your washing machine. Some symptoms replacing this part will fix include: leaking from your appliance, uncontrollabl... Add to cart