11070887991 Kenmore Dryer - Instructions

We found great video instructions via youtube.com to give us an idea to what might be the problem even before we opened the dryer. Then we opened the dryer top and front door and then removed the belt and drum. We then saw that one of the drum wheels was worn and the rubber part of the wheel was warped off. Once we saw what part we needed we ordered them through PartSelect.com since their wonderful instructions helped us out. Once we received the part we easily removed the old drum wheels and installed the new ones...super easy! Then we had to put the drum back in with the belt. The only "difficult" part was looping the belt around the motor because there was a lot of tension. Once that was set we just put the door back on and then the top! I guess the only snags we had during the process was where exactly to remove screws or pry open certain places b/c every dryer is a little different. I just advice people to really look at their dryer and think about how it is held together instead of just unscrewing everything. We are so glad we found the partselect.com instructions via YouTube.com. We were ready to buy a new dryer but fixing the dryer ended up only costing us $30! Our dryer is so quiet now, just like it is brand new.

when I see its no gas flame, i deduct the flame sensor and the electric coils not fuction, I order tru partselect and that take me like 30 min. to remplaced those parts.

From the description of the symptoms on the site and what part fixes those symptoms I was able to determine what part I needed. The video was very easy to follow and understand it was very helpful. Hands down the best parts website I’ve ever come across.

Removed the front panel (door and all) to repaired the belt as the instructions said took him 10 minutes. Than as we have the door off we snapped the old door catch out and snapped the other on in less than 5 minutes. The most work was me holding to front panel while my husband screwed the screws off and back on. Total time 25 minutes. My dryer is from the early 1990's. Our baby girl was in high school. She's 29 years of age now. As long as this company stays around we will be ordering our parts from PartSelect. Thanks!

The dryer is a Whirlpool Duet,Model GGW9200LW0. My wife said, the dryer was not heating. I never repaired a dryer before, so I went online to get some ideas about what to expect. I saw the web site for PartSelect.com,typed in the model number and the part drawings and hints to repair along with vedios to help me guide with the repair. Now I removed the top cover from the dryer and on the right was a ziplock bag which contained the technical info about the dryer. With the tech info and hints from PartSelect I selected the parts. Because the weekend was two days away I received the parts on Monday. On Tuesday, I started to work on the dryer, first I removed the front and rear panels vacuumed the inside, located where the parts went, changed the parts, one-at-a time. Put on the back panel, gas line, and exhaust hose, and put electric plug in. Started the dryer and walla, the dryer started, the gas burner came on. All parts fit and no problems, Thank You PartSelect.

I watched the repair video on your website,that was abig help , dryer runs good

Used the putty knife to pry open the front of the top cover. Removed the retaining screws securing front cover to each side. Lifted front panel off bottom hooks and holding drum, removed front cover. used wood block to hold drum in place. removed broken belt and belt tension spring. Keeping the rubber side of the belt against the drum, threaded belt through the tension spring onto the drive motor flywheel. Tilted dryer backwards to hold drum in place while removing wood block. Assembled front and top in reverse order. Used pressure to secure top to spring clips.

Let me put it to you this way I called the repair man and they would Charge me $150 to get the dryer fixed,by ordering the parts I spent $32 and 15 minutes installing it with the instruction video very easy to do Take the advice it yourself and save yourself some money $$$ With The extra cash I took my wife out for dinner Now that's money well spent...

Had an idea how the repair would go. The video is a great tool for someone not mechanically inclined. Easy fix and will save from paying a repair person. Suggestion .... put a small block of wood (or something simular) under the drum when you pull the front cover forward to save from having the drum drop down making sure the back seal is still seated and in place. No big deal and easily fixed if it pulls away.

Just like the instructions. Piece of cake.

I felt the belt had broken since the unit was still running. I went on-line looked at some you tube movies to get some idea what to do. Was very helpfull. Found on-line how to get the part forb this nearly 20 year old dryer. Had the part shipped overnight, was able to track it. Followed your innstallation instruction, With the heavy rubber bands hooks at both ends it was easy. Never done this before, sure saved a good amount of money.

First I removed the lint screen from the top of the machine and then the 2 Phillip head screws that where located under the lint screen door. Next I used a Flathead screwdriver to lift the top of the dryer from the bottom and propped it up against the wall in back of my dryer, next i removed the two screws from the inside front corners of the dryer with a ratchet and the appropriate size socket. I then removed the bottom front panel of the dryer with my Flathead by prying it off at the clips once removed I had access to two screws near the bottom, i loosened them with my ratchet and socket, I pulled out the top of the front panel with the dryer door open as I supported the drum with my free hand. once I removed the front panel I then removed the drum and set it aside. I took this opportunity to vacuum out all the dust from the bottom of the machine and the burner. I then removed the screw from the bottom of the first drum support wheel then i pried the clip off the drum support wheel axle Pulled off a second clip that held the wheel in place then i removed the broken wheel. I removed the back clip which was already cracking i put on the new clip, the new wheel and then the second clip, long story short I replaced the other drum support wheel which was still good but since i had everything apart i went on and replaced it too. I then put the drum belt on the drum, and I positioned the drum in place and put the front panel back on i put the top screws back in then i routed the belt around the tensioner and put it back in place. I rolled the drum all away around while pulling the drum gasket out and placing it in its proper position before i tightened the rest of the screws i plugged the machine in and checked to see if it was working as it should it was so i unplugged the machine and tigthend everything after i put the machine back together i dried a load and while running i went into our bedroom and asked my wife "do you hear that"? She said "no" and asked me what was she supposed to hear. We purchased the dryer used about seven years ago and it never ran as quiet as it does now. Its so quiet you can actually hear a click and then the sound of the burner kicking in.

Followed the parts select You tube video. Was helpful. Note the Ignitor kit is very sensitive. We didn't need an ignitor right now but purchased one in case the other 2 parts didn't help the problem. We took the ignitor ( wrapped in a bag) out of the packaging and it snapped in half without even touching the sensitive end. Note handle with extreme care.

Took the back dryer cover off and removed the lint cover all from the back of the dryer then replaces the Thermistor (held with 2 screws).

First off, I ordered the part around 1 pm, paid regular shipping, and it was here the very next day! As for the repair, maybe the easiest fix I have done. Make sure the dryer is unplugged, pop the top up and remove the front of the dryer. Take out the pulley (careful it can snap ya) then remove the drum. The snap rings around the motor can be tricky, so be sure to watch the video sent to you from PartSelect. With a couple of wrenches, loosen the motor from the blower and remove. Put new one in and put back together. Piece of cake. Took me about 20-25 mins. This is the best place I've ordered from and will continue to get my supplies here. Good Luck!