11068847700 Kenmore Dryer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Heater element would not heat
Removing the element was easy. I also replaced the sensors. Putting the element back in the dryer was a little difficult because of the tab on the top of the element housing. Just remember to remove the arm that protrudes from the element housing. My wife says that it is drying faster and more efficiently.
Parts Used:
-
David from Blackfoot, ID
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
no heat
pretty simple fix not much to it. If you are familiar with electrical work a dryer is just about as basic as it gets. Thermal fuse was bad, swapped it out and up and running again. It took me longer to get the dryer pulled out and cleaned up, than it did to replace the fuse. Wow was it diry back there!
Parts Used:
-
Brian from Cinnaminson, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
replaced switch
-
Barbara from Algonquin, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
dryer didnt turn on because piece broke to signal door being shut
a salesman from sears told me that all i had to do was take putty knife to pry dryer top off .I found piece and unplugged broken piece, which was hardest thing to do and plugged new piece in and put the screws back in dryer.There was also video online that made it very simple. I am very grateful to salesman because he saved me lots of money.
Parts Used:
-
tricia from hammond, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer timer was counting down but dryer itself would not start!
Watched the video but realized my dryer was a little different removed bottom front panel to expose area to remove thermal fuse. Checked for continuity, found that there wasn't any. Ordered part and replaced it, fired right up!!
Parts Used:
-
Armando from Hilmar, CA
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer stopped heating
My husband took the back off the dryer and the Thermostate fell apart in his hands. So detecting the problem was easy. Ordered a new thermostat it arrived in 2 days. Tok him 30 minutes to install and get dryer put back together. Works better than it had been.
Parts Used:
-
Gina from St. Marys, WV
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
moisture sensor stopped working
Pretty easy to fix, hardest part was having to get the screws out of the inside of the dryer to replace the sensor itself. Once that was done it was pretty quick! PLUS super fast shipping on my part!! Was fixed before any repair places even called me back!!
Parts Used:
-
kim from cotati, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer keeps running and no light when door opened
Watch the video first. 1.) To open dryer top- remove screws, it pulls forward and up, prop up lid. 2.) Unscrew door switch from front, watching which way it inserts. Screw in new switch same way. 3.) Use a tiny screw driver and loosen old switch plug all around edges- it then slips right off. Slide on new one and it will lock on the little lock tab. Make a note which color wire is on the pointed side of plug- mine was white and put new one on the same. 4.) Test and replace dryer top. FOUR EASY STEPS, 15 MINUTES REPAIR TIME, I RECEIVED MY PART FROM PART SELECT IN 2 DAYS= UNBELIEVABLE!!! EASY and YOU SAVE A FORTUNE!
Parts Used:
-
Susan M from Fairview Park, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
dryer would not start
The dryer would not start when pushing the power button and the timer clicked rapidly. Another You Tube video lead us to the thermal fuse. First, we took the lower front panel off, it had two little groove places to pry open with a flat head screwdriver. Then we took off the venting piece. It was jammed full of lint which is why the thermal fuse blew. The thermal fuse itself was tricky to get at the nut in order to loosen it. We vacuumed out all the lint, cleaned the venting piece and lint filter. When the part came, again the nut was tricky, but just requires patience. Put everything back together and the dryer works great again! Really easy and I wonder how many dryers get replaced when this happens.
Parts Used:
-
Christina from Langley, WA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
dryer wouldn't start
I woke up one morning to the dryer not working. Every company that I called wanted to charge a high price to come check the dryer. I decided to get on YouTube to troubleshoot the issue. There were a few videos that I saw, but the video for partselect was the best one I saw. I decided to explore the site to see if there was something I could do to fix it. I love the Instant appliance repair help, where you give the issue and it tells you what the problem most likely is. When I put in my model number, it said that it was most likely the thermal fuse or thermostat. I decided to get both since they were inexpensive. I received the part within a couple of days. I decided to come back to the site to make sure I was putting the part in correctly. If it wasn't for this site, I would have been paying hundreds of dollars instead of the $30 that I spent. Thanks so much PartSelect!!!!!!
Parts Used:
-
Niya from Atlanta, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The latch at top came off.
-
Tonya from Aberdeen, MS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
wouldnt heat up
poped off front bottom panel just a couple screws to take loose slid out the heat element saved 172.00 dollers
Parts Used:
-
Autumn from Columbia, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
drier would not work
-
RICHARD from COTUIT, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer rusn but no heat
Initial diagnoses suspected a faulty igniter. After deterininig that there was not power to the igniter I unplugged the dryer and systematically tested the continuity of each of the temperature limit swithches which all checked OK. The last item in the circuit is the thermal fuse which proved to be faulty. To confirm that this was the only problem I monentarily by passed the fuse to verify that the burner came on. To do all this I had to remove the fron panel and take out the drum. Actually the thermal fuse is located behind th back cover and is very easy to replace and probably should have been my fist go to suspect. Note the likely cause of the thermal fuse failure is a plugged up lint filter or exhaust duct which should be checked before installing a new fuse.
Parts Used:
-
Steen from Provo, UT
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
the lint filter needed to be replaced
-
Kathleen M from McDonough, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!