1106858701 Kenmore Dryer - Instructions

Removed front dryer panel removed torn belt and replaced it with the new belt.The job was easier than i thought.

I watched your repair video and followed what the repair man said and did, it was a snap! I needed my dryer fast so decided to do it myself. I am a 65 year old female and petite, so I say if I can do it anyone can. Your video was the key to my sucess.

ordered the part late sun. afternoon. arrives ups on tues.am. took dryer apart and replaced belt and up and running in about hour and half. works great. dyrer is about 25 yrs. old.

Sunday, the drum on the dryer quit turning. I could hear the motor running, so I guessed that the belt had broken. I jumped on the internet and searched for Roper Dryer parts and Part Select jumped up. Within 30 minutes, I had a new belt ordered. I received the e-mail with the how-to included and boy did it save me some hassel. I was prepared to do it all wrong until I saw the video. When the belt arrived, it took me longer to gather the tools I needed than it did to change the belt. Thanks

To start off I am disabled so I had my 14 year old daughter to help me.I opened the top of the dryer,disconnected the door button and had my daughter help wire the top open and take off the front panel.We took this time to clean out the dryer for it was quite built up with lint.I then gave my daughter my cell phone and told her to stick it in the dryer to take pictures of the area we needed to work on.I then showed her the pictures and explained in detail how everything worked and what she needed to do.I then put the belt around the drum and she proceeded to put the belt on the pulley and tension rod.At this point we are both filty and both have gotten miner injuries.I spun the drum and it and the belt both spun,we thought GREAT we have fixed it,so we put it all back together,plugged it in and nothing.So we take it back apart,but this time I stick my hand in there and find out she didn't have the belt on the pulley,it was wrapped around the tension rod so I fixed that problem.Then I figured out that she hadn't pulled the tension rod over to its proper place so I do that as well.This time I spin the motor fan in front to make sure we have it right.We put it all back together, plug it in and it WORKS,so we throw the jeans in because we have to be at a B DAY party in a couple hours.The dryer buzzer goes off and we both go to check and the clothes are soaking wet.I open the top of the dryer and the brand new belt is broken.So many mixed emotions at this time I cant tell you how disappointed and upset we where.So she took her jeans out and used a hair blow dryer to dry them and I hung the rest all over the house.So I decide not mess with the dryer for a couple days because of my frustrations with it.We have to do laundry everyday,I have three teenagers,so I have clothes drying all over my house every day.Even went to the laundry mat once $40.00 it cost me.A couple days go by and I decide to see what happend. This time I have my 15 year old daughter help me.I completely disconnect the dryer from everything.We put it on top of A table and take it apart.What do I find?the motor pulley is broken and has jagged edges the shredded a piece of the new belt.As I mentioned earlier I am disabled and am on SS so I only get paid once a month and have no extra money so now I have to wait until the end of November to order another belt and the motor pulley.In the mean time there is wet laundry hanging all over my house with fans blowing on it to help dry it faster.So what was supposed to cost approximately $20.00 to fix is now going to total over $100.00.I do thank you for the speedy delivery of the dryer belt and we had A great time at the B DAY party.thanks

Replaced both drum wheels and belt and cleaned lint out of entire unit. Works perfect again. Great fast parts with super on line instruction if you need it.

Followed general instructions from your you-tube video. It was much easier than expected. We didn't know if it was belt or rollers, turned out to be roller, but since we bought both we replaced both.

I researched the issue, found a video and ordered the belt, which came in 2 days. It was inexpensive, and I had my dryer back and running in less than 3 days. I did get my son to help me as it might not be that easy with just 1 person (to hold the drum in place while putting the front back on). Great service and great information on how to do the repair.

When we ordered the part we watched the video, to see what needed to be done and both my husband and I got the dryer all ready for install before part came so when the Ups delivery came it took all of 10 min to get it back up and running! Thank you so much for having the details and a video made thing go so well! Sincerely Dawn

I loved the demo video on how to do the repair-it was very helpful. My dryer was different than the one on the video, and I had to make adjustments ( I had self tightening screws on the top and bottom of the front panel and then I stripped the screws)I did this by myself and I had to prop up the drum AND the front panel with items in laundry room.) That's why it took me longer than demo (also had to run to hardware store to get screws). Felt great to accomplish this by myself. Thanks!

I know now that I did not have to get in the back of the machine. Only lift top remove two screws for the front and lift off.The most diffcult was determing how the idler and belt went in but if you hold it in position it becomes to you. Thanks for all your help you run a good ship.

I unplugged the dryer then loosened the screws on the top and inside front, took the front off, I didn't need to unplugged the socket wiring attached to the door. Removed the drum (it came right off) wrapped the new belt around the drum, fed the belt through the tension flange and looped it over the pulley. Then rotated the drum a few times by hand to line everything up then put everything back together. It works fine now.

Before placing your order remove the motor. At the rear of the motor is a plastic nut which is how the fan is attached. Mine was stuck and needed to be removed with a cutoff wheel from the back side of the dryer. This delayed the project several more days as I had already received the motor before figuring out the fan was stuck.

Watched the repair video on part-select. Pulled the top of the dryer up after removing the lint trap screws.removed screws at top, inside both sides and then lifted front off. Slipped belt over drum and ran through tensioner and around motor shaft. Put dryer back together in reverse order. Simple.

The only added thing to know is how to remove the lower kick plate. This is not on later models. Other wise all the directions are the same as for models with a full solid front panel. Immediately below the dryer door, at the right and left end, there is a plastic clip similar to the one holding the top panel to the vertical side panels. Insert a flat screw driver or putty knife releasing the plastic clip. This will allow the kick plate to fall forward on rings at the bottom of the plate. Release springs at either side of the dryer door (reattach later using pliers or a hook). Unscrew the nut screws at either side of the dryer door. Remove the door panel and the kick plate and put to one side. Reverse to reattach. I replaced the wheel tension part and the belt at the same time. I put the dryer on its back to install the wheel, belt and tension part. I used strips of scotch tape to hold the belt in place at the top and sides of the drum, while I looped the belt on the tension wheel and the driver wheel. I used the bungee cord to hold the top in place while I put the whole drier on it back. Good luck and have a vacuum handy to suck out years of dangerous lint....