Models > 11067834794 > Instructions

11067834794 Kenmore Dryer - Instructions

All Instructions for the 11067834794
2161 - 2167 of 2167
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
broken dryer belt
instructions were clear and repair was easy
Parts Used:
Multi Rib Belt - 92-1/4"
  • Thomas from Waterford, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Does not turn or tumble
Well, to Figure the issue I took the entire thing apart. Actually a lot more than needed. I found the torn belt and ordered it. I did not realize I may need a new belt tensioner which is sold with a wheel for the belt to wrap around and be tensioned by. Actually the original just utilized a rubber c or u shaped design(no wheel) for the belt to slide over. Anyways, instead of ordering and waiting for a new wheeled belt tensioner, I installed new belt with all original parts and working fine. I did oil up the drum rollers to reduce noise. And since I took the whole thing apart I cleaned the lint from every place it could hide. Ps a coke can is said to be helpful to hold the drum up while installing the belt but I found a jug of laundry detergent did better. Totally easy project for someone with no appliance repair history
Parts Used:
Multi Rib Belt - 92-1/4"
  • Charles Weston from Pikesville, MD
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broken belt that makes the dryer drum go around
The broken belt was found when I opened the dryer. The part number was on the belt and a quick online search led me to PartSelect. The part was available, delivered in less than 2 days and there was an online video showing the entire repair in detail.
Parts Used:
Multi Rib Belt - 92-1/4"
  • kevin from madison, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Dryer will not cut on
My ground wire in my electrical box was not connected.
Parts Used:
Thermal Cut-Off Kit
  • Richard from Memphis, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
timer did not advance
I watched the video. Thermostat wasn't the problem tho. It was the timer.
Parts Used:
Dryer Cycling Thermostat
  • John from Ithaca, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
Dryer wasn't heating up
The parts above did not fix the problem. We also bought 2 gas valve coils and igniter after installing them the dryer works perfectly
Parts Used:
Dryer Thermal Fuse Dryer Cycling Thermostat
  • Raymond from Dunellen, NJ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
dryer just shut off and would not start
went online to whirlpool typed in my problem and. was directed me to Partselect which said it was thermal fuse and had picture where it was located and how to replace,easy as that.thank you PartSelect.Tim
Parts Used:
Dryer Thermal Fuse
  • timothy from sheridan, WY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 11067834794
2161 - 2167 of 2167
Back to Top