11067642600 Kenmore Dryer - Instructions

I watched a youtube video about how to replace a dryer belt. I did what it said.

Followed the On Line Repair on my Lap Top. Very Easy !

Followed instuctions on video accept our appliance was the Duet HT model so we had a glass window to deal with. Just a few more screws to keep track of but otherwise a very easy repair.

Watched installation video (very hepfull),used battery driver (faster)to remove back (9 screws). Used nutdriver to remove screw holding old part, removed part. Changer wires one at a time to prevent wrong placement of wire. Parts ordered were correct and arrived in 2-3 days. Thanks PartSelect. Very easy install, video made me an "instant repairman."

Thanks to your video my husband felt very confident and the belt was installed with no problems.

found that the lever on the switch was broken,i found one on the part select website and ordered it. the picture was very helpful in confirming the right switch was being ordered.thank you

After doing on line research at other sites, I bought an inexpensive multimeter, took off the back of the dryer, and started trying to figure out what part wasn't working. I might as well have tried to diagnose a jet engine problem, I didn't have a clue. Then I went to the Part Select site, and their stats showed that in 50% or so of the cases where a Roper doesn't start, you need a thermal fuse, and should also replace the cycling thermostat while you're at it. The "how-to" video showed me exactly what the parts look like, and where they are in the machine, and the cost of the parts plus delivery was less than $50!! It was worth taking the chance for $50. The parts came in two days, were installed in five minutes, the dryer works and I'm thrilled! Part Select is the absolute best. This is the first appliance repair I've ever done. I would never have done it without you. Thank you.

ordered new latch. Arrived promptly. Installed in 5 minutes. Actually easied than the video. Thanks

The Door Catch Kit had clear instructions for installation and included multiple replacement catches to fit several different sizes/varieties of dryers. I used a screwdriver to pry out the broken door catch, popped in the replacement, and was done! As usual, PartSelect had what I needed at a good price, with clear instructions for any needed installation. Fast shipping, too.

I followed the video link on the website step by step - that was much more helpful than reading the included instructions which seemed a little obscure for this layman. I thought for sure i would have to drop another $500 on a new dryer after buying my last one less than FOUR years ago! Ended up spending $40 including shipping which was super fast.I am now a dedicated fan of partselect and I know exactly where to go when my next appliance breaks..which they seem to do way too quickly now days.

Disconnected power to the dryer, opened the top of the dryer by sliding a thin scraper underneath the top on the front of the dryer and the pushed the top of the dryer up. I then disconnected the wire on the switch to isolate the switch from the wire in the dryer. I then removed the switch by unscrewing the two screws on the switch and then replaced it with the new switch. I then reconnected the wire to the wire in the dryer.

Unplugger dryer, removed the back, located and removed the thermal fuse and cycling thermostat, installed new parts plugged in the dryer and activated a drying cycle to check for burner operation, dryer cycled on burner cycled on. Problem solved reinstalled the back. Easier than I expected.

First I changed the thermal fuse. Still did not heat up. Then changed the heater element. That fixed the problem.

After running the unit for a minute or so I removed the back of the dryer. Unable to locate the problem from this vantage point, I then removed the bottom kick plate. Using a small flash light, and turning the drum by hand I discovered that one of the support rollers had burned out the bearings. I went to this web site to see if I could still get parts for the unit. I found not only the part, but a full repair kit. Knowing all the parts would need to be replaced at some point, and that Mom could not afford a new unit I replaced everything. The parts did truly arrive in one day when they arrived I went back to your web site. I had seen instructional videos while looking for the repair parts. After watching the video I removed the dryer drum, removed the parts to be replaced (2 drum support rollers the belt tension roller, and belt) I replaced old with new cleaned entire unit reassembled and it is working like a champ thank you very much for all the parts, and info

I was very pleased with the shipping speed, the belt arrived in less than 24 hours! The installation was very easy and if you need help the video on the belt info page should be helpful.