Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
Below is a list of all parts for the Kenmore Dryer 1106708501. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This is a door catch kit, and it is designed for use with your dryer. On your appliance you will find both a strike and a catch, these two parts work together to keep your dryer do...
The drum support roller kit allows the dryer to tumble properly by supporting the drum cylinder. The kit includes two drum rollers, four tri-rings and one palnut (or retaining washer). The kit does not include a belt or idler pulley and rollers are not sold individually. The drum support roller kit may need to be replaced if the dryer is noisy or will not tumble. The tools needed to complete this repair are a putty knife, Phillips screw driver, and a 5/16 nut driver. It is recommended to look at the rear felt before reassembling the dryer to ensure there are no gaps or damage. This is an OEM part sourced directly from the manufacturer.
This part provides the tension required for a multi-ribbed belt. It also serves to help the belt to rotate the drum and attaches to the idler pulley wheel. If your dryer will not s...
The heating element provides heat to your dryer during the drying cycle. If you notice that your dryer is taking too long to dry clothes, or is providing little or no heat, you may need to replace the heating element. This element carries 5200W and 240V. Be sure to disconnect the power to the dryer before completing this repair. Please note, this element no longer includes two terminals and two adapter leads. They must be ordered separately. The leads are OEM part number 279457. The dryer heating element is located in the back of your dryer, so you will need to remove the back panel to access this part.
This filter collects lint as it passes through the dryer vent.
This motor fits most Whirlpool incorporated dryer brands before 1996. NOTE: Pulley is NOT available separately.
This black actuator spring with white rubber tip is used for both dryer doors and washer lids.
The blower wheel is a squirrel cage type wheel whose purpose is to move the air through the room or appliance.
This 3 prong lid switch is used for washing machines that do not have a tub light.
This seal comes with the adhesive backing.
This dryer door cable is intended for use with spring part number PS343422. This cable is compatible with many of Whirlpool/Kenmore's brands of gas and electric clothes dryers.
Includes high temperature adhesive.
Cycling themostats continually cycle the heating element off and on to maintain a constant inner temperature within the dryer. This particular cycling thermostat can be adjusted be...
This part is used to secure the top panel to the cabinet. Sold individually.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.