11062702102 Kenmore Dryer - Instructions

Using a Nutdriver, took all screws off from back panel. Located heat element, took 2 more screws off. Taking 1 wire off at a time, just to make sure they went back on right. Finished with the wires. Replaced element, then put back on. Plug dryer back in. That easy!!! Now I'm back in business. Very easy. Thank You.

wow took less than 15 minutes to change switch watched online video was so easy change thanks lot

ordered a replacement light - took about 5 minutes, hardest part was disconnecting power and getting into the dryer replace light. The second part was replacing the dryer switch. This took a bit longer, but was completed. The plastic locks on the top were a little different than the video, but once I saw how the one worked (one side popped open very easily) the other one just took a bit of nudging and opened easily too. Now that I have done this, I am not afraid of working on it for other issues. Great helpful site. They will have my business for other repairs.

My husband changed the part but part select was very helpful. With their free repair help site it made repairing a breeze! We will use parts select again and again. I did order all the parts we might have needed and only needed one. Now I will return the others.

Called partsselect on monday and parts arrived tuesday. The repair is simple to do. I removed the lint filter, opened the top of the dryer, disconnected the door switch, removed the two screws holding the front of the dryer then lifting it up to remove. I removed the broken pulley assembly and belt. I installed the new pulley assembly and belt. Then I reassembled in the reverse order.

We found great video instructions via youtube.com to give us an idea to what might be the problem even before we opened the dryer. Then we opened the dryer top and front door and then removed the belt and drum. We then saw that one of the drum wheels was worn and the rubber part of the wheel was warped off. Once we saw what part we needed we ordered them through PartSelect.com since their wonderful instructions helped us out. Once we received the part we easily removed the old drum wheels and installed the new ones...super easy! Then we had to put the drum back in with the belt. The only "difficult" part was looping the belt around the motor because there was a lot of tension. Once that was set we just put the door back on and then the top! I guess the only snags we had during the process was where exactly to remove screws or pry open certain places b/c every dryer is a little different. I just advice people to really look at their dryer and think about how it is held together instead of just unscrewing everything. We are so glad we found the partselect.com instructions via YouTube.com. We were ready to buy a new dryer but fixing the dryer ended up only costing us $30! Our dryer is so quiet now, just like it is brand new.

it was so simple, just take back panel off dryer and remove two screws and relace heating element.very easy to do.alot cheaper than new dryer or repairman.

Removed the back panel and observed the Thermal Fuse at the bottom of dryer.One screw and two connectors and changed the fuse. Problem solved and Dryer working again. Easy Fix and Thanks.

Repair took less then a hour. Very simple and easy to install new thermal and heat control.

When I told my Uncle I needed to learn how to fix a dryer he gave me a multi-meter and his old repair manuals from when he was a repairman. My uncle lives in another state and recently had heart surgery. I read them then I read up on multi-meters. I tested each part. The cycling thermostat appeared to be dead. I found Part Select during a search for that part. I ordered it and received it very rapidly with great service. I put it on and discovered the heating element was also dead. Back to Part Select got it fixed it runs like new. I did not memorize the model number and I have no idea how old it is so I am unable to answer all your questions. I'm not really fit to instruct anyone I'm not even sure what I'm doing.

Multimeter to check start switch, then thermal fuse. Removed back panel and replaced parts. Very easy for anyone to do.

Follow the video that PartsSelect has posted. Easy repair. I spent most of my time cleaning out the lint from the back of the dryer. Wasn't bad but figured I do it for general maintenance and fire prevention. *** Important *** There was an additional piece (thermal cut out fuse) that existed on the original heating element. Be sure to remove it and transfer to the new heating element. Easily done with a pair of needle nose pliers.

From the description of the symptoms on the site and what part fixes those symptoms I was able to determine what part I needed. The video was very easy to follow and understand it was very helpful. Hands down the best parts website I’ve ever come across.

Removed the front panel (door and all) to repaired the belt as the instructions said took him 10 minutes. Than as we have the door off we snapped the old door catch out and snapped the other on in less than 5 minutes. The most work was me holding to front panel while my husband screwed the screws off and back on. Total time 25 minutes. My dryer is from the early 1990's. Our baby girl was in high school. She's 29 years of age now. As long as this company stays around we will be ordering our parts from PartSelect. Thanks!

I watched the repair video on your website,that was abig help , dryer runs good