11062212100 Kenmore Dryer - Instructions

I opened up the instrument panel box using philips screw driver and found the repair instructions. Followed the symtom diagnostic page and found that if the machine can be turned on but motor not working then check thermal fuse or motor. Next, I unplugged the appliance and remove the back panel to locate where the thermal fuse and other parts per the diagram in the repair instructions. Using a volt meter, I removed the electrical plugs to the thermal fuse and check resistance (a 1 on the volt meter indicated that the fuse is open (or burned)). Removed the thermal and checked for part number and looked up the model and parts number on the internet. Took a chance and ordered the part. When the order arrived 3 days later, I just simply replaced it and put everything back to where they were. Hooked up the power supply and turned on the dryer. It works again!! One thing I found was that I needed to clean the air pipe since it was totally clogged and probably caused the machine to overheat and burn out the fuse.

Took the old part off and replaced it with the new one.

pretty simple fix not much to it. If you are familiar with electrical work a dryer is just about as basic as it gets. Thermal fuse was bad, swapped it out and up and running again. It took me longer to get the dryer pulled out and cleaned up, than it did to replace the fuse. Wow was it diry back there!

repair was simple

Very easy to installation,first belt has to go on drum and then through pulley,pulley go on it`s place ,need some pressure on pulley to instal it.Very easy.Thank`s for fast belt delivery. Richard

I followed the instructions on the repair video provided by Parts Select. Super easy!

Watched the video but realized my dryer was a little different removed bottom front panel to expose area to remove thermal fuse. Checked for continuity, found that there wasn't any. Ordered part and replaced it, fired right up!!

Ordered heating element and follow instructions provided by PartSelect.com - The video was very useful. I previously called an appliance repair service for diagnostic and paid $60. The technician gave me an estimated cost for repair including the part would cost $340. which I did not want to spend so I went to the internet and found PartSelect web page and ordered the part. My husband was able to fix it with no problem. Your selling point is the video instructions. I will recommend your business to friends and family. Sincerely, Maria Ferrari

Ordered new rollers from PartSelect. I followed the video to replace the rollers. Everything went well. The video did not show how to put the belt back on. I then went to replace broken belt and there was the way to go through the pulley. Works great with no noise. Just like new. Thank you

My husband who is in a wheelchair and his freind who had never worked on a dryer,watched the video online and boom! just like that it was fixed!Some nut told me it would cost too much to fix,To just get a new one!Boy am I grateful for you!Thank You.virginia.

First and foremost, PartSelect is awesome! I placed the order on a Monday afternoon with regular shipping, and I had the belt Tuesday evening. Total repair involved removing several screws to open the top and front of the dryer, then installing the new belt. Pay close attention to the the dryer seal - make sure this is completely set. This was a very, very easy repair, and it cost me less than $20 for part and shipping! Also, the video on the PartSelect site shows exactly how to make this repair, and was very helpful.

I faced the intimidating Kenmore clothes dryer head on..fearless, cause that's how I roll. Utilizing my mad Kung-Fu skills I stared deep into the knobs striking fear into the household appliance, I immediately established myself as the dominate repair man in this awkward " love/hate" arangement. I just kept thinking to myself, "Remember: Eye of the Tiger." Once the brow-beaten dryer realzed "who's the boss" I began to commence the procedure. In lieu of all of the painful and embarassing moments that the dryer punished me with due to its breakdown, I decided to return the favor by using incorrect tools for the job! (Yeah, that'll hurt) With my bare hands and ONLY a pair of pliers I spun the dryer around, bent it over and then slowly removed every single hex screw from the back. Then once the plate was removed, I identified the heater element, took a picture of the wiring diagram ( since i cant remmeber where the red wire goes) and removed it. I then replaced it with the new heating element and reassembled the dryer. A few minutes later, I found myself next to a good as new dryer!!

Followed the video

I didn't. I was out of town when the part arrived. I talked my 13 year old son through the process over the phone. No difficulties. Wife/mom very happy to have her dryer back.

Heating element had 2 wire connections and 2 screws that held it in place and was easy to replace. Thermal fuse had 2 wire connections and 1 screw holding it in place. Over all, this repair took about 5 minutes to complete and the dryer works great again! Mike N.