1106 - Parts

Roller Support Tri-Ring

★★★★★

★★★★★

(5)

If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul... Add to cart

Heating Element

★★★★★

★★★★★

(52)

This element carries 5200W and 240V. Note: This element no longer includes two terminals and two adapter leads. They must be ordered separately. Add to cart

Thrust Washer

★★★★★

★★★★★

(2)

This genuine OEM washer has a 3/4 inch outside diameter. This thrust washer can be used on most makes and models of dryers. A complete list of compatible dryers is available below. The washer is found... Add to cart

Agitator Bolt

★★★★★

★★★★★

(10)

This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16". Add to cart

Dryer Radiant Flame Sensor

★★★★★

★★★★★

(12)

If your gas dryer is not heating up or igniting, then replacing the flame sensor, located in the burner assembly, could solve it. This part senses heat from the igniter to monitor if it is hot enough ... Add to cart

Leveling Foot

★★★★★

★★★★★

(13)

If your washer shakes or vibrates loudly when it reaches its max speed, check that the leveling legs are even. To ensure that the washer is firmly on the ground using all four legs, adjust the legs so... Add to cart

Dryer Lint Screen Filter

★★★★★

★★★★★

(145)

This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white a... Add to cart

Lint Filter with Handle

★★★★★

★★★★★

(53)

This filter collects lint as it passes through the dryer vent. Add to cart

Door Catch Kit

★★★★★

★★★★★

(20)

This door catch kit is designed for use in dryers. This is an authentic OEM replacement part. This catch assembly ensures the door of your appliance will close, and remain closed. It allows your appli... Add to cart

Idler Pulley with Bracket

★★★★★

★★★★★

(41)

The idler pulley wheel is now sold with this arm. This idler pulley is for dryers. Idler pulley maintains correct tension on the drive belt to spin the drum. Add to cart

High Limit Thermostat and Thermal Cut-Off Kit

★★★★★

★★★★★

(21)

Also known as Thermal Cut-Off kit. The thermostat acts as a safety mechanism that keeps the dryer from overheating and the fuse is like a backup system - it's set to trip at a higher temperature than... Add to cart

Heating Element Connection Wire Kit

★★★★★

★★★★★

(3)

This kit is used for electric clothes dryers, and it comes with a yellow wire nut. Add to cart