Mon-Fri: 7am-1am EST / Sat-Sun: 7am-11pm EST
Below is a list of all parts for the Kenmore Washer 11044832202. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.
This part is also called the Door Boot Seal. It's the main seal between the front bulkhead and the outer tub. Clamps are not included. Must order clamps separately, if needed.
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. This part is used on front load models.
This part is used on front load washers and includes the interlock switch assembly.
Shock absorbers help keep the washer from vigorous shaking during its cycles. Sold individually.
Used with some front load washers. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
This part continually measures the amount of water entering the tub. It will make adjustments if too much or too little water is present.
Used to help hold your bellow in place on your washer.
Attaches to door lock mechanism.
This metallic screw is less than an inch long and comes with a plastic washer.
This is used to help hold the bellow in place.
This hose clamp is sold individually.
This drive belt is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt get wear and tear.
NOTE: Per Manufacture, belt measures 48...
This hose goes from the drain pump to the back of the washer.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2015 , Eldis Group Partnership. All rights reserved.