11026934691 Kenmore Washer - Instructions

one thing that you do not need to do is to remove the pump from the motor, I tried to remove it as per the instructions but the pump cracked,remove both inlet and outlet hoses from the pump and remove the pump and motor together, don't try to take them apart, you don't need to, thanks

Did not know problem or how to access - thought the back came off washer. Typed in symptoms and it pretty much pinpointed the most likely cause. Watched video on how to take it apart (BTW the front and sides come off, NOT the back). Followed the guide, took motor off and sure enough one of the plastic couplers was cracked. Ordered from PartSelect and with regular shipping the cost was under $20 (ordered Tues. night, had it by Thurs.) Installed part - note as someone else said the new piece has metal inserts which make it really snug to go around the drive shaft, but the tip about using an oversized socket and some light taps to get it on worked liked a charm. Put it all back together (getting case back on was toughest part)and its been working fine for the last week - heavy & lite loads. Have to say was thinking the whole thing needed to be replaced (sound & age) but for $20 it was worth the shot...Glad i came here first!

After diagnosing the problem, the repair went exactly as the instructional video had shown. Knowing how to disassemble the washer housing prior to starting made the task much easier. Partselect is a Money saving website. Thanks

It was actually much easier than I expected. The worst part was dealing with the gear oil as I drained it to clean out the plastic pieces that came off the gear. To see how to fix things like this, I went to Google, enter my model and what the problem was and watched a repairman do it. It seemed easy and it was.

The clutch itself was fairly easy to repair. I did use some tips from youtube on disassambly, and the enclosed instructions helped to put the clutch in. There were 3 bolts I had to remove to take the drive assembly off, and 1 to pull the agitator out. And putting it back together it went in almost backwards. All in all, this is a fairly simple procedure in taking the time to complete the steps

Removed the upper sgitster by removing the center bolt to the bottom agitater. Manage to pull the cog housing apartfor inspection. left apart and ordered the new cogs. received the cogs within 30 hours and reassembled the unit and bolted it back to the main agitater. works perfect. great service. Thanks Ed PS Now my 97 year old mother in law can keep washing clothes. Shes happy again.

Remove the sides of the washer, motor ran but nothing moved, closer look found drive coupling broke (10 years and it made of plastic) Order a new part from you, arrived very quickly. Install the part 10 min. later it was running.

Removed the cap and the unit that held the cogs or dogs. Replaced and reassembled. Took about 5 minutes.

Pop the top of the agitator off, 3/8th socket to remove the bolt holding the entire Agitator assembly, pull straight up to remove the entire agitator assembly, remove agitator dog assembly, pull plastic retainer holding agitator dogs in, replace agitator dogs, replace plastic that holds them and just put the thing back together. If it takes more than ten minutes you must have stopped for a beer break

replased all the springs

We followed the step by step video that you had posted for those parts. It is now working wonderfully. The repair man had told us it could not be repaired. Thank you so much for having these do it yourself instructions.

Followed the video did not need to tilt machine over. Layed on floor it was more comfortable. The most difficult part was putting back on the tension band on top that's because I got a little tired on the food. Thanks for all your help. I bet I saved over $250.00 if a service tech came to fix this. You guys are the best

Took the water softener thing off, then there is another cover you just pull up on and it comes right out. pull the thing that has the agitator directional cogs ouy and replace them. Put it all back and you are done

real easy i follow your video step by step those video are great txs,.

Once you take the housing off it's only two clips to remove the water pump from the motor, then two screws and two more clips to remove the motor itself. One issue I ran into was the new coupling was hard to put on, so the first time I did I overheated the motor because it was binding (was also very hard to get the motor back on). After taking it apart again, and slightly tapping both couplings with a hammer the motor went on very easy and washer works like a champ!