11020432991 Kenmore Washer - Instructions

Terry from Gardnerville, NV
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)

Was this instruction helpful to you?

Thank you for voting!

bad water pump

found the how to on youtube, did it right in the laundry room, got it done in the morning before i went to work,

Parts Used:

Direct Drive Water Pump

tony from moses lake, WA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Would not spin all the water out

Your video made it easy, thanks

Parts Used:

Frank from Torrance, CA
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set, Wrench (Adjustable)

Was this instruction helpful to you?

Thank you for voting!

would not spin

as per videos, replaced clutch. worked perfect. thanks so much. i will definitely will use your services again. joe

Parts Used:

joe from asheville, NC
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set, Wrench set

Was this instruction helpful to you?

Thank you for voting!

Washer wouldn't spin water out.

I followed the video feed. I did have difficulty replacing the cover back correctly.

Parts Used:

Lid Switch Assembly

Andrea from Devereux, GA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set

Was this instruction helpful to you?

Thank you for voting!

water pump leaking

followed instructions on removing top and cabinet.unhooked the hoses. released the clips holding the pump. replaced the pump.put clips back. hooked up hoses. replaced cabinet and top.

Parts Used:

Direct Drive Water Pump

joe from new lenox, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Water Leaked Into Tub

Note that my washer is over 14 yrs old. With the video I was able to make the repair. However, due to the age of my washer, the repair was not a direct swap - there was one simple preliminary step in addition to the video instructions. This preliminary step was described by instructions received with the part. My advise: always read and follow written instuctions no matter how simple they appear to be - it will save you a lot of time.

Parts Used:

LYLE from PORT ORANGE, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set

Was this instruction helpful to you?

Thank you for voting!

Water leaking into washer tub.

I followed the instructions from your web site, and it was very easy. I started to purchase a new washer, but after watching the instructions I thought I would give it a shot. I am 67 and this was my first ever washing machine project. Thanks for your service and web site. If I need help or parts in the future, I know where to go. You saved me a lot of $$$.

Parts Used:

Kenneth from Apollo beach, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)

Was this instruction helpful to you?

Thank you for voting!

Hot water not flowing

received along with my confirmation of order, a video and step by step instructions that I printed out. The installation went absolutely perfect. No stress, no mistakes. GREAT! Thank you

Parts Used:

lillian from Warsaw, IN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Machine will agitate but not spin

Follow your repair video, excellent.

Parts Used:

Sara from Winter Garden, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Valve threads leaked (Stripped) on spin cycle

Watched the video, followed steps shown, fixed machine. Easy piezy Japanesey.

Parts Used:

Glenn from Latrobe, PA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable)

Was this instruction helpful to you?

Thank you for voting!

Washer would not agitate or spin, but water would drain.

Super easy repair for my 20 year old washer. I have a really small laundry room and was worried about how much of an ordeal this would be. I had just enough room to remove the housing and get to the motor assembly without putting the machine on its side. The repair was just as shown in the video; 2 clips for the pump, 2 screws and 2 more clips to separate the motor from the transmission. I installed the new coupling and was doing a load of clothes in less than 30 minutes. Great service, fast delivery and low price. I will be coming back to PartSelect for my next repair.

Parts Used:

Dan from San Diego, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

Was this instruction helpful to you?

Thank you for voting!

Machine would not get up to speed on spin cycle.

Started by unpluging and disconnected water hoses.Removed agitator retaining bolt and pulled off. Tipped machine onto a support on it`s front side. Unplugged motor connector and removed drain hoses from pump.Removed the three motor bolts and rotated and pulled out motor and shaft. Removed retaining clip and installed new clutch assembly. Plastic clutch drive looked ok but since it was apart removed retaing clip and changed it too. Slid shaft and motor assembly back into machine and reconnected everything,works like a new one.

Parts Used:

Larry from Franklin, PA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set

Was this instruction helpful to you?

Thank you for voting!

Drive drive couping failed

After watching the video the repair looked easy. I took apart the unit per the video instruction, ordered the part and had the washing machine back up and running in 48 hours. Easy and the wife is happy!

Parts Used: