11016612692 Kenmore Washer - Instructions

After watching the video that came with the parts, it was straight forward, very well informative.

Put washing machine on it's back giving easy access to the bottom and the impeller. Removed hoses, clamps on the pump and it slips off. Put on new pump, hoses and clamps...job was done. Stood the machine upright and reconnected the inlet hoses with new washers.

The unit would not fill with water. My wife had been complaining that the tub had not been filling completely before the filling completely failed. If I switched the water level to another setting and then back, it would run fine for just one cycle. That's why I suspected the water level pressure switch. It was a very simply switch out, requiring just a philips screwdriver and popping the control panel on the top open (thankfully not messing with the main cabinet). It was replaced and reassembled within just minutes!

well ttook 2 screws out of the top unhook the wire to door pulled front back away from back and there it was easy as apple.

1. visited web site followed path for symptoms, identified part ordered 2. Dismantled Washer, removed motor, replaced coupling and re-assembled. 3 Tested outside to confirm working order before returning washer to inside location 4. Moved washer back inside.

I followed the step by step instructions on the computer stopping and starting the program as I went. Thanks Partselect

Just watched the video provided by parts select and then went to work. Excellent video. If I had been better mechanically inclined it would have been much faster. Thank You Parts Select! Also fast shipping.

I watched the video that PartSelect provided on their web site. The instructions were very precise and easy to follow. I watched the video twice and just followed the instructions. I would highly recommend this approach to washing machine repairs. It certainly saved me a lot of money.

took top agitator off, cleaned it (needed anyway), replaced agitator directional cogs, replaced washer (old one was too soft to reseal) upon bolting back together. Oddly the repair kit on this website does not include a washer - I only bought the cogs - it turned out to use the same washer I use on my kegerator

I watched a vidio on YouTube and figured the problem.then I tryed to find the clutch local but no luck! So I yahooed it and found this web sight,I ordered the the part and it came in a few days.The part showed up on a Friday and I put it in the next morning.I watched the link your parts sight refered me to and was very good ! I got all the tools together and started the project,it wasn't the exact same unit but it showed you enough to figure it out.I ran the vidio as I did the project and it went smoothly.I am very happy with the parts, the web sight and the lincks it shared with me . I booked marked the sight for future reference and have already shrared it with someone who has the same problem. thank you for all the help!

The video installation instruction was clear and very easy to follow. However, after installing the parts and started testing the washer, the water overflowed. It looks like the water level sensor wasn't working. It caused a little flooding in the area where the washer is. I took the control panel apart once more and this time diagnosed the water level sensor and analyzed how it works. After spending almost 45 minutes with, I detached the hose attachment and blew air which caused air bubbles in the inner side of the drum. I bent the hose to hold the air while re-attaching same to the sensor. This fixed the problem and the washer is once more, operating normally. Please include this part to your video instruction. Overall, it took me 8 hours on the project including the cleanup due to overflow.

Very easy repair less than 15 min. to complete. The ordering was very easy, and quick shipping. Glad to see parts made in the USA.

First of all I must say thanks guys for your help, the instructions were right on the money. I first replaced the clutch as per the instructions but found out that the problem was the motor coupling ........ It was broken. I ordered it, followed the instructions and I was a hero in my household. Once more thanks guys.

I watched the instructional video on how to take apart and how to take washer a part and how to install the direct drive water pump. It was very easy to do. also the delivery was very fast. I will be using the site to fix other appiances that I have that is sitting around broken. Thanks for your speedy service and customer service.

I followed the video which was very clear and concise. The actual repair took approximately 20 minutes and went very smoothly. It now functions as designed.