10660192001 Kenmore Refrigerator - Instructions

Turned off the water to the ice maker; disconnected the wiring harness to the ice maker; unscrewed it from the freezer (two screws). Unhooked the ice lever bar, opened up the motor assembly. Switch the motor out (two screws). Installed in reverse order.

Pulled out the icemaker. Switched out the Motor Assembly (so easy) and woke up the next morning with ice. Our ice dispenser wasn't working either. This repair inspired me to take the ice dispenser apart and I found that the lever arm wasn't touching the contact when pressed. We now have ice and a working ice despenser. Oh yeah--my wife was so impressed. The part came in on time and it was very very easy to replace.

Nothing to do, just unrap shelf from delivered package, wipe clean and put in refridgerator.

unplug frig, didnt turn off water used cord light to see. Took 1/4 nutdriver and loosen screws removed screw on bottom bracket uplugged ice maker. reversed the process for the new one and done

Shut water off to stop leak. Purchased new valve but it had different size fittings. Proper hardware was not included with the new part and was not available from PartSelect or Whirlpool, the maker of KitchenAid. I'm a paraplegic so my brother came over after I got the parts and the hardware. He was able to install the valve but it didn't work while he was here so he shut off the water supply and I'll have to wait and see if it works some other time. Until then, looks like I'll be using trays.