Models > 10660184001 > Parts

10660184001 Kenmore Refrigerator - Parts

All parts for the Kenmore Refrigerator 10660184001

Below is a list of all parts for the Kenmore Refrigerator 10660184001. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the 10660184001
1-14 of 198
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?

Light Bulb - 40W

Sold individually.


Replacement Ice Maker

***NOTE: Ice maker does NOT come with the bail or shut off arm. Must order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. Its harness can be reused. The ice maker will not fit refrigerators that have the ice auger mounted on the door.


Icemaker Control Assembly

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.


Crisper Pan

This crisper drawer is clear plastic. Sold individually.



This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer.


Bimetal Defrost Thermostat

This clip-on thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.


Condenser Fan Motor Kit

This condenser fan motor operates in a clockwise fashion and carries carries 2W and 115V. It comes with screws, a blade mounting nut, and a cushion. This part provides forced-air ...


Single Water Inlet Valve - 120V 60Hz 35W

Also known as a Water Solenoid Valve. The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold.


Door Shelf End Cap - Left or Right Side

Sold Individually.


Light Rocker Switch

This light switch is triggered by the door opening and closing.


End Cap Trim Piece

Sold individually.


Water Fill Cup and Bearing


Door Shelf Retainer Bar

End caps are sold separately.


Water Tube Kit

This tubing is 1/4'' in diameter and comes with 2 inserts. This tubing may be longer than the original, and may have to be cut.

All Parts for the 10660184001
1-14 of 198