10656676501 Kenmore Refrigerator - Instructions

The part fit perfectly. All I had to do was slide it in. Very speedy delivery and I am very satisfied with the service and would recommend your wedsite to anyone. Marie

watched the video on your website, assembled the tools needed, then replaced the bracket. It was so easy because I would play one step in the video, do that step, then repeat for the rest of the video. Very happy with the part and speed of service with partselect.com and the video was excellent !!

The instructions on line suggested I buy a lower door closing cam and a thimble top which I did. When I went to install I noticed that the door hinge with cam was also warn down. I had to again place an order and again remove the door to install. I would suggest those having this problem that they look at the hinge with cam also before ordering.

Removed the refrigerator door (after taking everything out of the shelves). Took the old Lower Door Closing Cam off (it was totally worn down), installed the new one, rehung the door. Rehanging the door took a couple of tries to get it properly aligned. Very easy fix, We thought we had to replace the refrigerator since it is 14 years old, but this fixed the problem completely!

Watched Parts Select YouTube video for demonstration of installation. Went smoothly.

We moved into a house that we are renting. The whirlpool refrigerator was missing the the ice shoot. The landlord wouldn't hire someone to install one. I am %95 blind. I went on PartSelect , entered the refrigerator and they had an easy blow up diagram. I ordered the part and watched a video on how to install it. When the part came in my son watched the video and had it installed. Hats off to PartSelect for their great web site .

remove contents of door-----------hardest part of chore remove top hinge cover remove three top hinge screws remove door and lay on table remove two screws holding black plastic cam piece in door, remove black plastic piece (slightly held in by some type of mastic) just pull till it comes our insert new piece, insert two screws lubricate parts mount door on hinge pin insert tip hinge pin and plate and fasten with three screws attach cover............reload refrigerator door taking opportunity to throw out old bottles and mystery jars Finis

1. I first confirmed that the problem was a bad Infrared Ice making control board (Watched flashing of red light on right side of freezer - solid light would not occur when holding flap on left side of freezer). 2. I unplugged refridg,3. unscrewed both sides of the control unit and disconnected wire clips to the electronic boards. 4.popped in new Boards on both sides and connected clips onto each board. 5. Screwed the boards and covers to walls of freezer. 6. Plugged power back into wall and checked Red light again (when holding flap in, a continuous red light verified it would work). closed freezer and shortly ice was being made. Simple process. (careful using Screwdriver to help take wire off of boards - a small clip holds wire clip on - you need to stick screwdriver into back of clip while unconnecting). Easy and my ice worked perfectly.

Did you know you have to press the button next to the filter before you pull on the filter cap? Like most week end warriors, I just pulled the cap and of course, I broke it! The repair was simple, hopefully, in six months I will remember to press the button!

Watched parts select video did what it said, was very easy to do.

Looked on YouTube and found the PartSelect video. Viewed the video and replaced the part.

We had cleaned the electronic eyes off several times which yielded one or two days of ice production. Since we could tell the ice maker was receiving water and producing ice we went ahead and replaced the controller. Now the ice maker is working like a champ. The instructions were easy to follow and the part was delivered quickly. Unplugged the fridge. Three screws on opposite sides of the freezer, plug in the emitter and receiver boards and replace the screws. Plug the fridge back in and away it went.

Simply done !

Replaced the water inlet valve. Note: although the web site shows the exact same water inlet valve, the replacement is somewhat different. You'll notice the electric prongs are facing in the opposite direction then the old one. It works like a charm need not worry as I did when I saw that. The old part is actually two parts in one. Use care when separating the front piece (it acts like a coupling where the water supply connects to and simply comes out the other side and into the refrig.) from the water inlet valve. It was a tight fit coupling that front piece to the new valve but it will fit. Make certain you purge 1-2 gallons of water before consuming any. Also dump a tray or two of ice cubes.

Called an appliance repair service, they wanted $326.69. Went on line, ordered the part, it came in 2 days. It took me 20 minutes to remove and reinstall the part. The sound of the cubes dumping into the bin was great. Thanks for your how to do it video. Oh by the way, I am a 68 year old handy woman!