10656662500 Kenmore Refrigerator - Instructions

easy,remove old parts installed new parts,icemaker started working properly.

Ordered a new Cantilever bin and inserted it back into the shelf space utilized on the refrigerator door.

Followed instructions posted on your site. It was straight forward and very simple to complete.

Initial diagnosis incorrectly led me believe the problem was with the optic eye. After replacing the optic eve and still no ice, I realized the problem had to be with the actual ice maker itself. The removal of the old ice maker and installing of the new one took less than 5 minutes. This of course was after watching the repair video first. I still feel that I saved money by doing the repair myself instead calling in a appliance repair man, even with the added cost of the probable unneeded optic eye replacement. I am very satisfied.

The ice maker quit working about 4 years after we purchased this refrigerator. I asked several contractors if they knew what the problem could be. All believed it had something to do with the water line being stopped up. However, when I looked at the water line, it seemed fine. Thankfully when I googled about repairing this refrig, I came upon this website. It stated statistically that the Icemaker assembly part was the problem. Guess what? Replaced it and it works! The repair was a little tedious, so I got my next door neighbor to help. He has a few moments struggling getting it out and the new one in, but overall, it was not too difficult. I believe I could have done it with the video's help but certainly would have taken me longer.

No way to fix the broken drawer. Order drawer online around 2:00 PM and replacement arrived about the same time the next day. Drawer fit perfectly. Easy to use online finding part with model number and excellent customer service.

I was cleaning my refrigerator. When the glass shelf was being cleaned it barely bumped the bottom of the sink. There was no water in the sink. The shelf exploded into thousands of small pieces simular to a car windshield. I was devastated! I went online and ordered a replacement that same day. The next morning I was on my front porch watering plants when a delivery truck pulled into my driveway. It was the replacement shelf. I cannot believe the fast service. Thank you.

watched the video. If your water dispenser is working on and off and it eventual quits,it is the water control vale that needs to be replaced.

i followed instructions on video it went real simple except for the small area to work in.

Well, we ordered the parts and they arrived in two days, we needed the cover, flipper, pin-door on one side of the ice maker, and we replaced them, we needed the bracket for the ice maker cover, we installed that, then came the auger drive motor, we had previously taken the old one out and to install the new one only took about five minutes, once we installed it...everything worked pretty good, but we have now ordered the emitter and receiver, because we got the one broad wet and it isn't working good, so we have gone ahead and ordered it....it shouldn't take to long to install that either.

Remove all items from door. Remove bolt holding plastic cover on top hinge. Support door and remove 3 bolts holding hinge. Lift door off lower hinge pin. Remove bolt holding both cam assy's and pry the one on the door out with the screwdriver. Replace both with the new cams, place door on lower hinge pin, place upper hinge pin into door, loosely insert the 3 bolts. Align the door, tighten the 3 bolts and replace plastic cap/bolt. Put the food back in the door and you're done. The only nut-driver needed is 5/16" and the screwdriver is only needed to pry out the cam that's located on the door itself.

I called a repairman, who removed the ice maker and reinstalled it, not once -but- three different times and charged me $84.60. (That's all he did.) I remembered, PartSelect, watched video, ordered motor, received in three days, installed in less than fifteen minutes. Within ten minuted water was running in and later ice was dropping into bin, next day bin was full. Wish I had trusted myself and looked up my fridge problem on PartSelect before calling that (repair) man, and saved myself $84.60. By the way, I'm a 67 year old female.

I'm sorry I can't help you with this, as one of my sons diagnosed the problem and did the repair for me. It took him maybe five minutes to swap the parts, and the ice maker has been working fine ever since.

Found video on YouTube. Ordered part from partselect. Part arrived and viewed video to refresh memory. Our refrig was a little newer than the video but the process ww was the same and quite simple after viewing the video.

The video explains it well, however, for those with the built-in model, the one with the wood panels, things are a bit different. Thanks to another writer, I received help. After you unscrew and remove the two side metal décor strips from the freezer, you are left with how to remove the no-screws décor ice/water panel. It does NOT slide out. You must carefully bend the panel out and away from its top and bottom tracks. I do wonder why not just make it slide out, but no such luck. Be careful not to over bend. However, once you begin bending from the middle out, it will become clear to you how its going to come out. Also, with this panel removed, and left hanging there, it is not necessary to unplug any of those electrical connects. The only electrical work is removing the light from the control bracket you are replacing, as shown in the video. I found bending the décor panel back in place was easier than pulling it out. Be sure to unplug the unit. Plug found at top of refrigerator behind very top wood panel. You will need to easily remove this very top wood panel, and you will need a step ladder to reach plug.