10652234101 Kenmore Refrigerator - Instructions

Removed three screws. Removed old part. Inserted new part and reinstalled three screws. Doesn't get much easier that

We logged on looking for a possible cause and solution. We found your website, diagnosed the problem, ordered the part and it came in two days. You even had a step by step video on how to change out the part. Kudos to you. Thank You

I took the tray out of ice maker, removed the screws holding the drum assembly. Dismantling the drum assembly careful as possible and placing the new drum on place of broken one, it still took twice to get it workable. Probably the next time I will follow the instructions a little more closely.

The repair man came out and said the Ice Maker is broken.He said to call him when I get the part but after looking at the video it took 10 minutes to Install. If you can use a screw driver this part is a piece of cake. Oh don't forget to unplug the frig. God Luck John Bronx NY

New part was not needed, when I removed lower closing cam the lower part of the closing cam attachment screw had worked it's self lose. So it just needed to be re-torqued. That took care of the problem.

Removed cover took out 2 screws put in new unit put 2 screws back in put cover on done

Place new shelf in freezer compartment

We suspected the thermostat assembly was the problem. We reviewed the video provided by PartSelect and accessed the thermostat assembly. To ensure the thermostat assembly was likely the culprit, we used a multimeter to test it. We ordered the assembly from PartSelect and were pleasantly surprised at the speedy delivery. Using the same video, we replaced the assembly and put the refrigerator back together. Thank you so much for saving us money we didn't have for the repairman. We will be ordering again soon to repair a leaky waterline and ice maker.

Went to parts select and found diagram of parts then found their page that shows percentages of each part being the cause (very helpful) then I watched video of repair (very, very helpful) and fixed the problem. Your company, PartSelect is the best! Rick

Repair was easy ordered correct part according to the model number new Ice guide Shute snapped into place according to the repair video guide.

very easy two small screws, no problems

I was cleaning my refrigerator. When the glass shelf was being cleaned it barely bumped the bottom of the sink. There was no water in the sink. The shelf exploded into thousands of small pieces simular to a car windshield. I was devastated! I went online and ordered a replacement that same day. The next morning I was on my front porch watering plants when a delivery truck pulled into my driveway. It was the replacement shelf. I cannot believe the fast service. Thank you.

watched the video. If your water dispenser is working on and off and it eventual quits,it is the water control vale that needs to be replaced.

I replaced the ice maker with a new one. All part were included. The cost was about $200.00 cheaper than what the repair person wanted.

Ice maker is held on by two clips and one screw. Removed old ice maker and unplugged wiring harness. It appeared normal. Since it was 15 years old and a brand new one was only a little more than $100 I decided to just replace it. Shopped online and got best price here. Delivered promptly. Item description said it did not come with wiring harness, but mine came with three different ones. However my wiring harness had a different molded plastic connector where it is plugged into the back of the freezer so I could not just pop it off and pop in the new one. Instead I had to reuse my old one. No problem, since the harness was not damaged anyway. Also I had to reposition the harness clip on the new ice maker and remove the plastic tab on the bottom and re use the tab from my existing ice maker. The tab on the new ice maker would not line up with the hole in the freezer. All in all it took about 10 minutes total to switch the two units out. Extremely simple job, do not pay someone to do this for you.