Models > 10651069101 > Instructions

10651069101 Kenmore Refrigerator - Instructions

All Instructions for the 10651069101
1291 - 1305 of 1459
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Not making ice.
Followed instructions on video on website. Very easy to do. Removed old part, put in new and it took all of 15-20 minutes. Had ice in approximately 1 hour.
Parts Used:
Icemaker Control Assembly
  • George from Palm Coast, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
broken door shelf
You saved us a bunch of money again! We love you!
Parts Used:
Refrigerator Door Shelf
  • GRACE from BREMERTON, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
The refrigerator would not cool
Only the compressor fan was running with no cold air, the compressor wouldn't kick on. I pulled the start relay and the disc inside was in pieces ( rattled when you shook it). I ordered the new one and installed it. The compressor started running right away and cold air was delivered to the freezer.
Parts Used:
Compressor Start Device Kit
  • justin from carlisle, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Door would not close by itself
Followed instructions on this website. Only difference I placed a couple blocks under the door to keep it from dropping & removed both cams at the same time. No need to remove the door from the unit.
Parts Used:
Door Cam - Black Lower Door Closing Cam
  • rich from liberty twp, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
Was this instruction helpful to you?
Thank you for voting!
the refrigerator tunrs off and defrost
After watching the convenient movie, the replacment of the Thermostat was very simple and easy. i woul strongly advise you to take a picture of the wires before disconecting so, you will be sure to to reconetc it again.The replacment was a success and the refrigerator has been working since them
Parts Used:
Thermostat Assembly
  • dorival from pembroke pines, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broke the water filter cap
That was soooooooooo easy. Thanks for a really wonderful website. Part was simple to find and shipped extremely fast.
Parts Used:
Water Filter Cap
  • Judith from Louisburg, KS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Side Of Drawer Was Broken And Couldn't Run On The Guides.
Took the broken drawer out and installed the new drawer.
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Valerie from Sevierville, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
bottom door shelf broke
Ordered part from Parts Select at half the cost of other listing on www. Took 5 minutes and shelf fit perfectly.Thanks.Mike
Parts Used:
Refrigerator Door Shelf
  • Mike from Palm Harbor, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Old refrigerator drawer gave up the ghost--don't know why--plastic became brittle
Parts Select Website was very easy to use, selected the correct part for me with no problem. Same drawer as Sears was selling but for much less money. Drawer came in new from the factory. Great Service, Fast Delivery. The shipper had damaged the drawer--something poked through the box and put a whole in the drawer--a small one cause by a sharp instrument of some kind. Called parts select, the problem was very simply rectified by refunding my money and then I bought a new drawer at the same time. No fuss, no muss. Fast delivery and great service.
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Lloyd from Spokane, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice bin auger drum had broken
Removed the auger apparatus from the ice bin, replaced the auger drum and then reattached the auger apparatus to the bin. Cause of breakage was due to ice melting in the bin and then refreezing. Keeping the many parts in the correct order on the auger can be difficult.
Parts Used:
Ice Bin Auger Drum
  • Shelton from Hertford, NC
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
The slide/ glide portion of the original drawer broke off
Pretty simple, remove the old one and put in the new one - kinda alike the "Automotive Tech's" of today.
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Doug from Acworth, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Floating baffle and Ice bin auger drum were both broken and needed replaced.
The video of the repair that was on your website was extremely helpful. It showed in detail how to replace the parts item by item. I could not have done it correctly without the video. I believe anyone could have replaced these parts with your instruction video.
Parts Used:
Ice Bin Auger Drum Floating Baffle
  • Jack from Babson Park, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Did not make ice
Watched video on changing out the ice maker motor and followed instructions and it was as easy as video demonstrated. Received replacement motor in 3 days. Great service.
Parts Used:
Icemaker Control Assembly
  • Robert from Jacksonville, AR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
Was this instruction helpful to you?
Thank you for voting!
old crisper drawer gave up the ghost--brittle
Nothing to it, just slide the drawer in. Fast Delivery, Smooth Transaction, Great Service. I will use them for all the parts I need in the future. Thanks
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Lloyd from Spokane, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice Maker would not make ice
removed ice make from freezer. Removed end cap and replaced control and mostor assembly. The associated You Tube video was very helpful.
Parts Used:
Icemaker Control Assembly
  • Anthony from Clarence Center, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 10651069101
1291 - 1305 of 1459
Back to Top