Models > 10651064100 > Instructions

10651064100 Kenmore Refrigerator - Instructions

All Instructions for the 10651064100
1591 - 1605 of 1776
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
refrigerator and freezer would stay frozen.
I shut the unit off for about ten hours and when I turned it back on and set the temperatures for the freezer and refrigerator it has been working great.I will keep the part in case it happens again.
Parts Used:
Bi-Metal Defrost Thermostat
  • Jack from Poplarville, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
Was this instruction helpful to you?
Thank you for voting!
direct drive drum broke internally
watched the installation video twice and took my time to make sure all parts were put back together in the right order
Parts Used:
Ice Bin Auger Drum
  • Bruce from Fort Smith, AR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
Was this instruction helpful to you?
Thank you for voting!
Ice door sticking open
I followed the really great repair video on this site. I would not have been able to do it without the video. Thanks very much for the video. Once I had the front panel off, it was relatively easy. Definitely would buy here again and attempt repairs myself. Very good experience! Very happy.
Parts Used:
Ice Guide
  • Peter from Sunapee, NH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
No ice
When very smoothly, as the video outlined the procedure.
Parts Used:
Icemaker Control Assembly
  • James from Thorp, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Refrigerator would not dispense ice
I watched a video several time to get the steps in the removal and reinstall. It really was not that hard but first time repairs can take extra time.
Parts Used:
Ice Bin Auger Drum
  • Paul from Fort Worth, TX
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers
Was this instruction helpful to you?
Thank you for voting!
ice maker got out of time water frooze with paddle down in the the ice tried to dump and spin (broke ) the timer gear off
turned off power unscrewed all the screw that mount ice maker, used flat head to release the clip on the wire harness, took out and exchanged the overfill wire, plugged the new unit in at wire harness, lined up and leveled ice maker tighten all the mounting screws, very simple repair i am very happy that you still had the orginal (OEM) ice maker, thanks Herb
Parts Used:
Replacement Ice Maker
  • Herbert from San Antonio, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Was this instruction helpful to you?
Thank you for voting!
Ice maker not dispensing correctly
Watched Video - took you through step by step
Parts Used:
Ice Bin Auger Drum
  • Frank from Las Vegas, NV
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
was liquing water where enter line for ice maker
was really ease remove three scwes fron back panel plus two more screws from the water valve
Parts Used:
Water Inlet Valve
  • Robert from Hialeah, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
Was this instruction helpful to you?
Thank you for voting!
plastic stopper came off arm
with a mirror to see the small hole on the front side of the icemaker.... very simple, took 1 minute
Parts Used:
ARM-SHUT
  • TinTina from Bruce, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped turning out ice
Removed three screws. Removed old part. Inserted new part and reinstalled three screws. Doesn't get much easier that
Parts Used:
Icemaker Control Assembly
  • James from Wasilla, AK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Cracked drawer
It was this simple. I removed the old drawer and slid the new one in place. I was simply amazed at how quickly I received the part. I ordered it on the 24th of July and received it on the26th.
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Dan from Covington, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
Was this instruction helpful to you?
Thank you for voting!
Fridge door wouldn't shut on its own
We logged on looking for a possible cause and solution. We found your website, diagnosed the problem, ordered the part and it came in two days. You even had a step by step video on how to change out the part. Kudos to you. Thank You
Parts Used:
Lower Door Closing Cam
  • Catherine from Strongsville, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Broken drum
I took the tray out of ice maker, removed the screws holding the drum assembly. Dismantling the drum assembly careful as possible and placing the new drum on place of broken one, it still took twice to get it workable. Probably the next time I will follow the instructions a little more closely.
Parts Used:
Ice Bin Auger Drum
  • William from Petal, MS
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Ice maker stopped working
The repair man came out and said the Ice Maker is broken.He said to call him when I get the part but after looking at the video it took 10 minutes to Install. If you can use a screw driver this part is a piece of cake. Oh don't forget to unplug the frig. God Luck John Bronx NY
Parts Used:
Replacement Ice Maker
  • JOHN from Bronx, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Was this instruction helpful to you?
Thank you for voting!
Crisper drawer cracked and fell out
Simply removed the old drawer and inserted the new drawer. I ordered on Monday and the part arrived on Tuesday without paying for overnight delivery. What a pleasant surprise!!!
Parts Used:
Refrigerator Crisper Drawer with Humidity Control
  • Henry from Laurel, MD
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the 10651064100
1591 - 1605 of 1776