10650564992 Kenmore Refrigerator - Instructions

The small arm in the tray for the ice maker stopped moving. I put hot water in there to see if anything was clogging up the line or the tray, but nothing was. I then pushed on the arm and it moved pretty easily. So I took off the front cover and the motor; I saw that the plastic piece connecting to the gear was broken. So I realigned and replaced the motor. Ice maker is working like a champ again.

We bought the fridge used and immediately see why it was being sold. But ordered a new thermostat and with Part Select's instructional video was able to replace the thermostat. I should mention it was my first attempt making any repairs to a refrigerator. It was fairly straightforward project.

First of all when deciding where to order part from I could have saved a couple of bucks on another site but I chose PartSelect because of the video showing exactly how to install the part. When installing the new part it went in exactly as described. Part seems sturdy. Ice bin now works like new again. Hopefully it will last at least as long as the original. Part was good, delivery was quick. I will look here again if I need more parts for any appliance.

Took out the door bins, 1 bolt on the plastic cap, 3 bolts on the hinge, took the door off, replaced cam at the bottom, all same size bolts, reset the door spent longer time cleaning the door selfs all done by my self in less than 30 min. others said it helped to have second pair of hands "my wife would of just got in the way :)"

Pulled off front. Detached wires without getting electrocuted. Marked them first so I'd know where they go. Pushed up the thing with wires so I could see the flap door. It had a heat thing in the flap which my replacement part didn't have, so I had to pull it out of the broken flap and insert in the new flap. Snapped flap door in place. Attached black thing loop to white thing. DIdn't use the spring or the white thing. Reattached wires and put on front piece. Everything now works. No more frost in the freezer!!!

i wasn't sure if this piece would fix my problem until i got into it and the tabs on that side if the bracket were broke preventing the control arm from accuating the dispenser.did as the video described. took the time to do some cleaning while i had the face plate off. i am recommending partselect to all my family and friends. i would quess this saved me $150 on a repair call!

Fowolled the video instructions except it was necessary to disconnect the damper control rod to correctly install the capillary tube. the defrost timer was extremely easy to replace after determining the correct terminal for the black motor lead. The side by side is working great with the new parts and I would recommend your product and web site.

I followed the instructions in the package, after having viewed the video (from PartSelect, but you have to go to youtube for it.) Replacing the valve got the cold water flowing but there still is no water going to the ice maker.

Removed the broken auger blade part,replaced it with the new one. Simple easy,and with the fast service you provided repair was accomplished quickly. Will contact your company for all of my whirlpool parts needs.

Made the order which came in a timely fashion. But the new pan was cracked. I immediagely called. The agent was friendly, personable, and helpful. She ordered a new pan, but it didn't come as it was supposed too. Yesterday I went to the barn and , yep, it was there! Why fedx put it there I don't know. But it is in good shape. Only complaint it that I have to keep the other part for 30 days to wait for notification whether they want it back or not! Otherwise very glad to have this issue solved.

Had a 1999 Kitchenaid Superba refrigerator that quit making ice. Based on online research, my icemaker's problem could have been either the icemaker itself or the dual water valve. I opted to try the icemaker replacement first after watching the helpful installation video. The only issue I had that made the repair the slightest bit difficult was that bolt-headed screws were used to secure the icemaker to the fridge wall rather than Phillips and the one nearest the door can't be seen while trying to loosen it. It only took an extra ten minutes to overcome this obstacle (maybe 20 minutes total). After replacing the icemaker, I thought the water valve must have been the problem after all since the unit did not immediately start filling with water. However, once the unit chilled down, it worked perfectly.

Loosened 2 screws,un pluged the wiring harness,pluged the new ice maker in,tightened the 2 screws. . And I now have ice!! Very easy to install. .

Found the replacement icemaker I needed on your web site,ordered and recdeived it within 2 days. Watched the how to video and did the replacement in less than 5 minutes.However,I waited(2 days) for the icemaker to start working, it never did. Thinking there was another problem in the icemaking system, I contacted a local appliance repair shop. They checked the entire system and everything was ok except the new icemaker. Turns out the new icemaker was defective. I contacted PartSelect and reported the technicians findings. I had another new icemaker in 2 days again. I again installed the new one and am now making ice. Thank you for the installation video and the teriffic service.

I removed the "bad" start relay parts (they basically fell apart in my hand when i removed it from the compressor). I got this troubleshootng info off the internet that helped me isolate exactly what was causing my problem. I followed the instructions that came with the new kit which arrived quickly to my home. The new parts were quite different from what i had removed. I installed the new parts according to the directions that came with the new kit. My frig & freezer worked normally. It sure was great hearing that compressor running again. I got this fixed in time for Thanksgiving dinner & saved quite a bit fixing this myself.

First Shut off Water supply from wall/valve. Turned off Ice maker switch interior freezer compartment. Removed power cord from wall plug, important for safety due to close proximity of cooling fan to valve, and resets electrical cycle to new valve to start water flow to ice maker once replaced. Removed lower back cardboard access to frig with nut driver, cleaned all (dust-bunnies)from coils, drip pan and all areas under frig with shop vac. Remove 2 screws (same size nut as cardboard back) to remove valve bracket from mount. This model frig had push release connectors so was even easier than expected, push collars up and pull out tubing, (residual water came out so have towel handy) had new valve positioned exactly how would reinstall so just pushed water line into new valve connector, then repeated process for all 3 water lines. Last unplugged electrical connectors and plugged into new valve in same position. Reattached new valve to mount w/2 screws, turned on water supply to check connections for leaks. (Finding none) Plugged electrical cord back into wall, used water pitcher to cycle water thru door water dispenser, waited for first cycle of water to fill ice maker. So easy and quick. Thank you to previous people who gave directions, and Partselect for easy diagrams, ordering, and shipping quickly.