10650212010 Kenmore Refrigerator - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door water dispenser broken
Removed outer cover. Removed control bracket which holds the water/ice dispenser paddles. Removed paddles from old/broken bracket, plastic pins were broken where the paddles hinge. Placed on new bracket placed screws and it was done. Very simple repair. Part cost less then $18.00 including shipping. Saved me mucho dollars!!!!
Parts Used:
-
matthew from fresno, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
Was this instruction helpful to you?
Thank you for voting!
no water but icemaker would dispense
hardest part getting the putty knife in right place to pop off cover---found the plastic bracket was broken where the switch was held in place---- so ordered new switches and bracket ---- got the parts in 3 days--good service--easy job 2 do and saved lots of $$$$$$$$---
Parts Used:
-
conley from Melbourne, FL
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Socket set
Was this instruction helpful to you?
Thank you for voting!
Water inlet valve was leaking
First unpluged the electrical service cord,turned the water off to the appliance Removed water line.removed 2 screws holding the valve to the appliance,unpluged the water lines to the ice maker and water dispencer,discarded old valve then just replaced the new valve, it works perfectly. How did you get it here so fast? I ordered it one day and it was here the next day, I was expecting to wait at least 3 to 5 days, very pleased with your quick service. Thanks a lot, Jimmy
Parts Used:
-
Jimmy from Union City, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!