Models > 10644329400 > Instructions

10644329400 Kenmore Refrigerator - Instructions

All installation instructions for 10644329400 parts

These instructions have been submitted by other PartSelect customers and can help guide you through the refrigerator repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 10644329400
796-810 of 1,129
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Water filter cap on my Whirlpool refrigerator was inadvertently disposed of in one of my earliest filter change efforts. I needed to replace it for esthetics and personal peace of mind.

  • Customer: Theodore from Albukuerque NM
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Ordered the replacement filter cap. Received it, cut open plastic shipping envelope after unsuccessful attempts to tear envelope by hand, snapped cap in place; Wallaah, project completed successfully!!!

Broken cap on water filter

  • Customer: David from Wiliamsburg VA
  • Difficulty: Easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
With new cap, align slots on cap with grooves on water filter, and snap in place. Easy.

Replace filter cap and filter ( lost filter cap)

  • Customer: Manuel from Miami FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Order new filter cap and filter ,remove old filter, follow instructions be sure to push new filter hard until it clicks!!

Broken Water Filter Cap

  • Customer: Pat from Newton NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Did you know you have to press the button next to the filter before you pull on the filter cap? Like most week end warriors, I just pulled the cap and of course, I broke it! The repair was simple, hopefully, in six months I will remember to press the button!

broken cap

  • Customer: John from Latham NY
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Took off Old Cap Put Knew One On.

Installing new "wiper" at bottom of ice in-door ice dispenser

  • Customer: Peter J from Montgomery TX
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 0 of 0 people found this instruction helpful
The plastic "wiper" attached to the bottom of the ice "auger" in the ice dispenser unit broke. (It was made from a plastic that was not up to the freezing temps and heavy ice loads it had to move.) The new unit seemed to be of a different type of nylon/plastic. Problem was that the small machine screw at the bottom of the auger assembly could not be removed because of corrosion. I had to drill it out. Choices then were to purchase a new auger for about 60 bucks or reassemble the unit with a new 6-32 machine screw. There will not be enough metal left to allow it to be tapped so simply clean it out well and glue in the new screw with JB Weld. Allow to cure over night and you're back in business. Ours works fine so far. Good luck!

Plastic Water Filter Cap was broken when I replaced a water fileter earlier

  • Customer: John from Katy TX
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Very easy - simply turn on the new cap.

We just bought a home with the refrigerator in it. The Water Filter Cap on the refrigerator was not there.

  • Customer: Kathie from Granbury TX
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
I had already hit the eject button and nothing happened. I could not get the filter out. I read the instructions, got on line and ordered the water filter cap. In the meantime, I worried about getting the filter out. I tried pliers and then I found after several tries and a lot of frustration, a lid off of a spray can that fit. I could have waited until the cap came in, but me being me, I could not wait. I worked the filter out, but waited until the cap came in the mail to finish the job. . I put the cap on the filter inserted it and finished what I had started the week before. Simple once I had the cap.

Dirty filter indicator

  • Customer: Dan from Irvine CA
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
simple twist the existing filter and pull, remove puller cap and place on new filter , pushed in and twist to lock. Reset filter indicator.

water filter light showed we needed to change it

  • Customer: Kathryn from Salem AR
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
only tools needed were my husbands hands. easily removed old filter and replaced with new one.

water not dispensing from refrigerator

  • Customer: Eugene from Bellevue WA
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Popped out the old filter from the refrigerator bottom. Removed new filter from the box and pulled off the end caps. Put the end cap on the new filter, aligned the filter( it will only go in one way) with alignment slides and pushed the filter in until I heard it (click) into place. Pushed in the water dispenser tab for a few seconds, but nothing happened. So I waited until the next day and pushed the dispenser in and water flowed out. Repeated this process until the water ran clear. Turned the ice maker back on and a few hours later ice was popping out. Wife's happy, I'm a hero!

time for filter change

  • Customer: ann from gastonia NC
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Tried to remove filter with no success, there were no instructions in the package. "googled" how to install whirlpool filter and found how to do it.

No ice cubes from the icemaker

  • Customer: Ronald from Oak Hill VA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Screw drivers
  • 0 of 0 people found this instruction helpful
Over the last several years we have had several appliance repairmen try to fix the icemaker. One replaced the entire icemaker. We bought a booster pump for the water. After spending about $1,000 over the past few years trying to fix the problem, a plumber doing routine plumbing work looked at it, and said it might be the control board. I found instructions online how to test the control boards. I ran the test, and they failed. I ordered the parts from PartSelect, followed their easy instructions, and tested the new units. They passed with flying colors. We now actually have an automatic icemaker for the first time in years.

Filter needed to be replaced

  • Customer: Bryan from Raleigh NC
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 0 of 0 people found this instruction helpful
Pulled out the old filter with the push of a button, removed filter cover from frig, took covers off the end of new filter and pushed it into the slot replaced cover. Job done--1 minute.

lcemaker stopped making ice.

  • Customer: Scott from McCall ID
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers, Socket set
  • 0 of 0 people found this instruction helpful
We ordered the icemaker part and a water filter. The water filter slipped into the slot and was very easy to replace per instructions on the box. We put the video on how to replace the icemaker on the computer next to the refrigerator and followed it precisely pausing it between steps. After replacing the icemaker we thought it did not work but it took a few hours before it started making ice again. After waiting overnight we awoke to new ice in the bucket. It went smoothly and was a breeze to fix.
All Instructions for the 10644329400
796-810 of 1,129