10644029601 Kenmore Refrigerator - Instructions

I removed the outside ice door panel with two flat head screw drivers inserted in the slots at the bottom of the panel. You simply pry out until the bottom releases and then you push it up gently to release the top. I then removed the hex head screws that held the outside wire panel and the switches, at this time you need to remove the old plunger that is connected to the top of the ice door assembly. I then disconnected the old heat strip and removed the hex screw that held the ice chute at the bottom. Then I removed the pin and spring that held the ice door assembly at the top. Replaced the parts with new ones provided in the kit. The ice door is no longer freezing up, nor is the ice bucket in the freezer. The freezer is now back to the right temperature, without having to be set on high

followed a movie on the internet. I'm 77 and I felt like it was very easy. My wife of 51 years gave me a round of applause when the first ice cube popped out.

No instructions with part. Found a picture on line and changed the arm, but it didn't fix the problem. Fairly easy after figured out what needed to be done to get to the part.

Watched a couple videos on youTube that walked us through the process. We aren't very "handy" people, but decided to give it a try. The videos just walked us through step by step. Easy! And this company provided FAST delivery!!

1) Removed 1 bolt that held a cover for the wiring harness. 2) slid out assembly 3) unplugged wiring harness. 3) removed the base from the old and attached it to the new [3 bolts] 4) reversed steps 3 thru 1.

Removed ice maker flap;using nutdriver removed screw/nut visible on right;pulled unit out until electrical visible; disconnected electrical;removed old unit;removed old unit from fram;(3-screw/bolts)assembled new unit on frame;reinserted unit&connected electical. Ice cubes formed in about 1hr.

Remove inverter box, replace with new inverter box.

Watched the informative video of the same repair twice so I would know what to do and the order in which to do it... the video made the removal of the old part and installation of the new part a breeze. Just follow the instructions and anyone could do this home repair, even those not mechanically inclined. Outcome success gave me confidence to do more of these types of repairs myself and save $$.

Removed and replaced retaining clip and installed a new strain relief. Parts arrived in 2 days from the time they were ordered. No problems whats-so-ever. Great doing business with Parts Select again.

The video on the website on replacing the Icemaker Assembly is great. I watched it then performed the R&R. It would have taken less than 15 mins but I took the time to clean the components which were reused. The water receiver on the new assembly is taller than the original. Luckily the water outlet in the freezer is rubber so I was able to bend it out of the way so I could slide in the new unit. The wiring plug in the new assembly was installed in reverse of the old one so I had to pull the unit back out, turn the wiring plug upside down, put it back in place then re-install the unit. Had a couple minor changes to make but the video is a great teacher.

Got on your website and found our refrigs expanded layout and ordered the part. The removal and install was less than one minute Including the clean up.

First off, the part I ordered arrived with broken tab. I called and had no problem getting a replacement unit mailed out right away. The video repair really helped a lot. Had a little trouble with the fill tube, it was a little hard to get inside the icemaker when installing the new one. Other than that, it was a piece of cake following the video instructions.

Watched your video, then removed old maker and installed new one. Makes ice fine now. Thanks

I ordered both the Ice maker and the control boards as It was for a rental and I did not want to make more trips then necessary to repair. I installed the new control boards and the ice maker and the refrigerator now makes ice.

Replaced both the control cards and the ICE maker and now it is working fine