10644022601 Kenmore Refrigerator - Instructions

I shut the unit off for about ten hours and when I turned it back on and set the temperatures for the freezer and refrigerator it has been working great.I will keep the part in case it happens again.

Watch the movie adjacent to the part on the ordering list,follow said instructions you can't miss.Thanks for the movie,the ease ordering the friendly associate that took my order and your timely shipment.Once again thanks for everything.Thomas J

Repair was easy. But what I really liked was the prompt/timeliness of the correct part delivery. That's what really made the difference. (My ice bucket is FULL of ice).THANKS!!

Watched video

Used 1/4 inch nut driver with swivel to remove the part retaining screw. Held new part into place and installed the retaining screw. Challenge was not hitting the level and putting water on me and the floor during installation. Relatively easy installation as long as you have patients.

Watched Parts Select YouTube video for demonstration of installation. Went smoothly.

1. I first confirmed that the problem was a bad Infrared Ice making control board (Watched flashing of red light on right side of freezer - solid light would not occur when holding flap on left side of freezer). 2. I unplugged refridg,3. unscrewed both sides of the control unit and disconnected wire clips to the electronic boards. 4.popped in new Boards on both sides and connected clips onto each board. 5. Screwed the boards and covers to walls of freezer. 6. Plugged power back into wall and checked Red light again (when holding flap in, a continuous red light verified it would work). closed freezer and shortly ice was being made. Simple process. (careful using Screwdriver to help take wire off of boards - a small clip holds wire clip on - you need to stick screwdriver into back of clip while unconnecting). Easy and my ice worked perfectly.

Did you know you have to press the button next to the filter before you pull on the filter cap? Like most week end warriors, I just pulled the cap and of course, I broke it! The repair was simple, hopefully, in six months I will remember to press the button!

Watched parts select video did what it said, was very easy to do.

We had cleaned the electronic eyes off several times which yielded one or two days of ice production. Since we could tell the ice maker was receiving water and producing ice we went ahead and replaced the controller. Now the ice maker is working like a champ. The instructions were easy to follow and the part was delivered quickly. Unplugged the fridge. Three screws on opposite sides of the freezer, plug in the emitter and receiver boards and replace the screws. Plug the fridge back in and away it went.

Called an appliance repair service, they wanted $326.69. Went on line, ordered the part, it came in 2 days. It took me 20 minutes to remove and reinstall the part. The sound of the cubes dumping into the bin was great. Thanks for your how to do it video. Oh by the way, I am a 68 year old handy woman!

online PartSelect had instructions for replacing icemaker. I gave them my part # and they sent me the correct replacement. following their instructions I was able to install the replacement in 30 minutes or less. PartSelect is a good company to deal with.

I called in a repairman, who wasn't sure what the problem was but suggested it "might" be the electronic control boards. He charged me $55 for the service call, which I initially thought was reasonable. Then I found your website purely accidentally. I watched the video several times and read all of the comments posted. I then decided I would wait to see what the repairman would quote me for the part and the additional labor charge. He told me the part was $125. and the additional service charge was another $75. I decided to order the part, which arrived in 2 days. I am a woman who has never repaired anything on my own, but I decided to take a chance with this. It took me about 20 to 30 minutes to install both parts and within a few hours the first ice cubes fell. I was so proud of myself and very pleased that I found your website. The price of the part was reasonable, the video was very straightforward and all of the comments were extremely helpful. Thank you.