10641514101 Kenmore Refrigerator - Instructions

I was a Sears repair man for fourty eight years , so I don"t think I should say how easy this was.

Once I determined easier access to the fan motor, I removed the three fan motor screws that held the motor on place. After removing the motor I remove the fan blade assembly held by one nut and reattached to the new motor. I then reattached the new motor with 3 new screws which were provide and reattached the power cord with the cord clip and began reassembling the icemaker housing, then moved the unit back in place which was installed under counter. I could do this repair in less than 45 minutes now that I have done it once. I saved several hundred $ from the original estimate and the parts were delivered in 2 days after I ordered online. This is definitely a DIY project!!

unplug freg.took everything out.pulled out shelves and pulled out back panel.their was my part i had to replace.

I was at a loss. Did not know where to find the part. Opened the website and navigated for a minute, then put in part number of the broken piece and the right part popped up! I ordered two and they came to my door in two days, popped into place and fit perfectly! Problem solved, no stress.....what a treat.

1. Unplug the refrigerator. 2. Remove the back cover at the bottom of the refrigerator. 3. Remove the two screws holding the vertical black bracket the fan is mounted to. This allows the bracket to move easily. The bracket does not have to be removed. 4. Removed the four screws holding the fan bracket to the vertical bracket. 5. Unplug the power connector from the fan motor. 6. Remove the entire fan bracket assembly from the refrigerator. 7. Remove the 4 screws holding the fan motor to the fan motor bracket and unmount the fan motor. 8. Remove the nut holding the fan blade to the fan motor and remove the fan blade. 9. Reverse the process, mounting the fan blade to the new motor, screw the motor to the bracket, screw the bracket to the vertical bracket, screw the vertical bracket to the refrigerator and plug the power connector back into the motor. I did not have to use any of the extra mounting hardware or electrical hardware provided with the kit. It might be a good idea to purchase a new fan blade with the motor kit, the fan blade can get pretty grungy. I cleaned the fan blade with some degreaser before remounting it.

Took the bolts at the bottom of the door off and removed the door. Pried out the old cam and put the new one in. Put the door back on and it works like it is brand new. The fridge is 13+ years old

Followed the very easy instruction that came with kit. Even a partially trained Monkey could do it with the easy instructions. very satisfied. Had Ice in about an Hour.

I read prior postings about how the compressor start relay was the most likely failed part based upon the periodic clicking as well as the rattle when the relay was shaken, with loose metal particles coming out of the original part. I ordered the replacement for next business day delivery and it arrived on schedule. The replacement kit comes with two relays for two different compressor designs. The correct relay is an exact replacement for the original, with the same part numbering. I removed the compressor start capacitor (a small black rectangular box with two metal terminals) from the original relay and installed it on the new part. The replacement kit comes with a black plastic cover, which did not fit since the start capacitor is in the way. I reinstalled the wire hook that secures the relay to the compressor body, and the refrigerator now works great.

IT took all of three to five mins after watching you tube video. Three sections to door handle.top annd bottom portions just slide away from center handle.. This will expose four srcews that hold the mids section.. screw out and replace new part and replace four screws. Push the top and bottom covers down and up to get them back in place...zzzz time

true story! ordered the part on sunday by e-mail.by tursday had'nt received it yet.so i called and they had no record of it. so i reordered it on the phone right then. the next day @ noon it came.i had my daughter take a picture of the part on the compressor so that it would be easire to put back together. i had'nt opened the new part yet because i wouldn't be able to retun it if it was opened.i took the old part off the compressor and the new part matched the old part. so i put it on ,it took less than a minute. started the refridgerator and the compressor started running. cooling off just fine and making ice.i am a happy customer!!

got new part it was easy fix thanks

No repair needed, just replacement but I would like to say that you did a fantastic job getting it to me. I ordered the part at approximately 2PM and by noon the next day, it was at my front door. Thank you for shipping so quickly.

unwrapped the packaging, and dropped the shelves in place, 5 minutes to complete"

I unloaded the door, removed the cap covering the screws at the top hinge. I removed the screws then lifted the door off the pin. Next I removed the screws holding the door cams in place. Replaced both cams and screws, set the door back on the pin then reinstalled the three screws at the top. Snapped back on the cover and I was done. Door works perfectly.

disconnected el. power to fridge. pried out broken switch with small screwdriner and pulled out w/water pump pliers. installed new switch and pressed into opening.