Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
Search the entire 11020422991 for your part by name.Keep searches simple, e.g. "belt" or "pump".
This coupling kit is used between the motor and the transmission on direct drive washers with no belt. This is the newer version and is made with new metal sleeves for added strength.
It is intended for use with washing machines that do not have belts. This drain pump has two ports for water to pass through: a large one, and a smaller one.
This part could have either a blue colored valve body or a green colored valve body. There are two ports for water to enter and this valve is compatible with a half inch ID hose. It has two 3/4-11x1/2 NHT hose threads.
A worn clutch can cause a slower spin speed which will leave your clothes wet after a cycle.
This clutch assembly comes with brake cam driver, blue spring for large capacity washers and black spring for compact washers. As per factory, the green spring (1.24") replaces the black spring (1.46").
This part comes with a three-wire lead. The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.
This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".
This part is used to balance the tub during spin cycle. Sold individually.
This screw is sold individually.
This package of pads contains three brown tub wear pads.
It connects from the pump to the back panel.
Also known as Main Outer Tub Seal. This part helps to prevent leaking from the bottom of the tub.
This metallic screw is less than an inch long and comes with a plastic washer.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.