Quick Question!

Have you ever purchased from PartSelect.com before?

Lid Switch Actuator Assembly

PartSelect Number PS347797

This part is used to activate the lid switch when the lid opens/closes.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will Not Start.
  • Will not drain.
  • Will not agitate.
  • Compare At

    $16.72
  • You Save

    $2.79
  • Your Price

    $13.93
In Stock
Order within the next 9 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Bumper

Part Number 11741847

Sold individually.

Order within the next 9 hrs and your part ships today!
$4.63
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 2 reviews What's this?
1-2 of 2
 

630 of 651 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Nicola from Centreville, MD

Washer would not run, lid switch broken

Repair was easy. Removed two side panels on the control plate. Removed two phillips screws that hold the control panel to the body of the washer. Disconnected the electic connection to the wires leading to the lid switch. Three sided of the lower cover lift over and removed from the washer frame. Access to the lid switch and wire retainers was easy. Removed two screws holding the remaining parts of the switch and replaced with new. Re-routed the wires through the retainers. Set the sides back on making sure the set all the way back in the frame and fit properly into the plastic strips on the back of the washer. Reconnected wires, screws and end caps.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 21 people found this instruction helpful

Parts Used:
  • Lid Switch Actuator Assembly
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: David from Danville, VA

No spincycle

pried out old actuater with screwdriver and pushed in new one

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2