Kenmore Microwave Grates

Your Price

$46.35

Kenmore Microwave Vent Grille - Black

★★★★★

17 Reviews

PartSelect Number PS391931

Manufacturer Part Number 8183851

The vent grille, used in microwaves, mounts on the top of the appliance and covers parts inside the microwave without blocking off airflow. Instead, the vent allows air to pass through the slats. If the vent is blocked or damaged, it is best to repair the vent grille. To repair, first remove the screw that holds the grill tabs with a Phillips screwdriver and clean the vent area. Next, install new grill into the appropriate tabs and make sure to secure the screws to prevent it from falling. Refer to the manual provided by the manufacture for installation instructions and accurate guidance. Remember to unplug appliance from power source.

Fixes these symptoms

Door not closing properly
See more...

Installation Instructions

Lawrence from Langhorne, PA

Replaced vent grill and grease filters

The repair was simple and easy. It required a Phillips head screw driver only. I Removed the vent grill and replaced it with the new grill there were only two screws that needed to be removed then refastened. Total five minutes. I also replaced the grease filters which took about a minute total time. I do many of my own repairs to my home and appliances .I've found your service parts delivery prompt and precise. Read more...

Your Price

$51.12

Kenmore Microwave Vent Grille

★★★★★

28 Reviews

PartSelect Number PS391973

Manufacturer Part Number 8183948

This white plastic vent grille mounts on the top of the microwave above the door, and covers components inside the microwave while allowing airflow through the slats. If the door on your microwave will not close properly, the vent grille could be at fault. If you notice that the vent grille is discolored, cracked, or broken, or if the mounting brackets on the grille are damaged or broken, you should replace the part. To replace the part, you will only need a Phillips head screw driver. Make sure this part is compatible with your microwave before ordering. This part does not include the screws used to mount it to your microwave.

Fixes these symptoms

Door not closing properly
See more...

Installation Instructions

Michael from Myrtle Beach, SC

Vent Grill was broken

I slid the new grill into position and secured it with the original two screws. Could not have been easier. Read more...

Your Price

$43.29

Kenmore Microwave Vent Grille

★★★★★

5 Reviews

PartSelect Number PS392268

Manufacturer Part Number 8184599

This vent grille mounts on the top of the microwave above the door.

Installation Instructions

Evangeline from Lansing, KS

the vent was cracked and falling off!!

took off the old and put the new one in place and screwed it in on top ...took only a matter of minutes to do... Read more...

Your Price

$48.81

Kenmore Microwave Vent Grille - Biscuit

★★★★★

2 Reviews

PartSelect Number PS391932

Manufacturer Part Number 8183852

This vent grille mounts on the top of the microwave above the door.

Installation Instructions

Kathleen from San Jose, CA

screw tabs were broken

removed the two screws, removed all of the broken tab pieces, replaced with new grill, put the two screws back.,....DONE Easy as pie

After reading other entries, I have determined this is a problem with most grills on the whirlpool microwaves. Defective material ..becomes brittle and crumbles. Read more...

Your Price

$180.86

Kenmore Microwave Vent Grille

★★★★★

1 Review

PartSelect Number PS752092

Manufacturer Part Number WB07X10525

This black vent grille mounts on the top of the microwave above the door. Screws are NOT included.

Installation Instructions

Scott from Mercerville, NJ

Grill was cracked and Filter was wearing Out

First I removed the old air/grease filter from the exhaust fan. It get washed monthly, so after several years of use, it was time to replace it. Once the old filter was removed, I opend the new filter package, slide the new filter into the filter slot from left to right. Once in all the way, I slide it back to the right to set it completely.

Second I began work on the cracked grill. I removed the phillips head screw on the left side of the grill, then removed the phillips head screw on the right side of the grill. I pulled the old grill off straight out. I opened the new grill package. I started to install the new grill by insert the bottom part first, then insert the top tabs and guide second, make sure I pushed slightly on the grill so it seated top and bottom at the same time. I installed both phillips head screws, left and right side, and completed the job. Read more...