Kenmore Microwave Elements and Burners

Your Price

$198.63

Kenmore Microwave Bake Element - 3400W

★★★★★

11 Reviews

PartSelect Number PS1992188

Manufacturer Part Number 318254906

This bake element is found on the bottom of the oven.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Oven not heating evenly
See more...

Installation Instructions

Lynn from Denton, TX

Element burned up.

Removed old element and plugged in new. Very simple. Read more...

Your Price

$179.75

Kenmore Microwave Bake Element

★★★★★

14 Reviews

PartSelect Number PS978774

Manufacturer Part Number 318255401

Fixes these symptoms

Element will not heat
Little to no heat when baking
See more...

Installation Instructions

Ruth from Slaughters, KY

burned out bake element

step one. removed 2 screws from back panel
step two. gently pulled out element
step three. took new element out of box
step four. began hooking new baking element
step five. electrocute husband (forgot to shut off electricity)Oh, by the way he survived!
step six. turned off electricity to oven
Step seven. hooked new baking element to oven
Step eight. replaced two screws to back panel
All went well with the exception of step 5 and it bakes great! Read more...

Your Price

$164.95

Kenmore Microwave BAKE ELEMENT 2300W

★★★★★

4 Reviews

PartSelect Number PS978773

Manufacturer Part Number 318255103

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

John from SILAS, AL

Bottom bake element bad

Look up on you tube and followed instruction Read more...

Videos!

Your Price

$153.22

Kenmore Microwave Broil Element

★★★★★

7 Reviews

PartSelect Number PS3506411

Manufacturer Part Number 318255605

This broil element is found on the roof of the oven and heats food. The most common reasons you would need to replace this part is due to the oven not giving off enough heat, not turning on, or not baking your food at an even temperature. This could be due to the element being burnt out or broken. Make sure to unplug the oven before you begin. You will need to remove the oven from the wall to complete this repair. This is an OEM part that comes right from the manufacturer, ensuring the best quality.

Fixes these symptoms

Element will not heat
Little to no heat when baking
Little to no heat when broiling
See more...

Installation Instructions

Kevin from Alexandria, VA

Broil element wasn't working...

I pulled my unit out of the wall and noticed that the insulation around the top broiler element was a bit brown. Closer inspection revealed that the element had shorted somehow to the oven itself and caused the element to become non-functional. I tried measuring the resistance first, and it was within typical values for the other elements, but I decided to replace the element anyway.

I ordered from PD and the part arrived just a few days letter by regular shipping. I undid the screws holding in the element, undid the wire connectors and replaced the broken element with the new one. The element worked like a charm and I was back in business for cooking. Read more...

Your Price

$161.15

Kenmore Microwave Range Bake Element

★★★★★

4 Reviews

PartSelect Number PS978770

Manufacturer Part Number 318254902

This bake element is for ranges. Bake element is at the bottom of the oven and supplies the heat for baking. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.

Fixes these symptoms

Element will not heat
See more...

Your Price

$355.50

Kenmore Microwave Bake Element

PartSelect Number PS3655318

Manufacturer Part Number 318601604

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Heidi from RIDGWAY, PA

Lower oven would heat to temperature, but would not continue to maintain temperature.

Troubleshoot element by disconnecting the element leads from relay board and test for acceptable resistance across leads. In my case the element had tested open with no resistance.

******You may not need to remove oven depending on how the framing under the oven is constructed.

**** Before you begin, disconnect power from the oven.

1.Remove two screws under oven, directly below rear of element door, and remove the metal piece the screws held in place. This will free up the back of the element access door panel.
2.Remove front trim strip on front bottom of oven, this will expose two screws directly behind trim strip. Remove the two screws behind the trim strip. This will free up the front of the element access door.
3. Lower element access door. If you can open the element door enough to disconnect the element wire leads and get the element out, you can swap out the element now and will not need to pull your oven out of the wall. If you can't open the access panel to fully access and replace element, slide the oven out until you can get the access door open and prop the front of the oven up on something sturdy you have laying around. In my case it was the good old yeti cooler. I would seriously consider removing the oven doors before you slide the oven out. It will make the oven alot less tippy by removing the weight from the front off the appliance. The element wires are short, you may need to disconnect them to get the element access door all the way open.
4. Install the new element and reassemble using these instructions in reverse order.
5. Reconnect power.
6. Make a batch of cookies. Read more...