Jenn-Air Range Seals and Gaskets

Videos!

Your Price

$87.22

Jenn-Air Range Door Gasket

★★★★★

15 Reviews

PartSelect Number PS11749287

Manufacturer Part Number WPW10162384

The oven door gasket on your range functions as a seal between the warm interior of your oven, and the outside. It prevents heat from fleeing your oven when the door is closed. Before making any repairs to your oven you should make sure to wear work gloves to protect your hands, and give your oven time to cool. The only tool you will need to make this repair is a pair of needle nose pliers. This oven door gasket comes with built in retaining clips; if any retaining clips from your old gasket are left in the oven make sure to remove them before installing your new gasket.

Fixes these symptoms

Door won’t close
Little to no heat when baking
Oven is too hot
See more...

Installation Instructions

Lori from Scottsdale, AZ

Needed to replace oven door gasket.

First removed the old gasket using a needle-nose pliers. Then placed new gasket by inserting the little clips on the gasket. Took 5 minutes. Great instructions from Repair Forum. Read more...

Your Price

$8.04

Jenn-Air Range Brass Seal

★★★★★

1 Review

PartSelect Number PS11744111

Manufacturer Part Number WP74005893

This is the replacement brass seal for your range or cooktop. It is made of brass and is approximately 1 inch in diameter. This part may also be known as the surface burner orifice holder seal. It prevents gas leaks between the surface burner orifice holder and the surface burner head. The main reason to replace this part is if the old seal is damaged or missing, as gas can leak out. It is important that you unplug the range and shut off the gas supply before beginning this repair. This part is sold individually and is an authentic OEM part.

Installation Instructions

John from WAKEFIELD, MA

Flames appeared outside of burners

The front burner had a noticible flame coming from the base, so I originally purchased a single burner to replace it (you could see a corroded hole at the bottom). Upon taking the unit apart, I noticed the corrosion was much worse than met the eye. Given the age of the unit and that some parts were already becoming discontinued I decided to gut the whole thing and replace it all.
The burner unit slides out easily and after unscrewing the sides, you have to disconnect the wires from the underside of the igniters. The venturi tubes and igniters then unscrew from the underside of the burners which twist right out of the assembly. Re-Assembly is very intuitive looking at it and it all goes right back together as it came out. Took 45 minutes total and that includes fighting with some screws that had rusted onto the burner.
Reading some of the previous reviews, current prices are double to triple what other people did the repair for leading me to believe parts won't be available for much longer. Make the repair while you still can! Read more...

Videos!

Your Price

$61.25

Jenn-Air Range Door Seal

★★★★★

5 Reviews

PartSelect Number PS11743947

Manufacturer Part Number WP7212P043-60

This door seal is used for ranges and ovens. The seal prevents hot air escaping from the oven to maintain a certain temperature when baking. The clips sticking out of the seal help secure it to the range doors for the most effective performance. This seal is black in color and is made of rubber. If your oven is not heating evenly, has little to no heat when baking, or is too hot, replacing the seal can solve the problem. The tools needed for this repair are needle nose pliers. Make sure the oven is cool before starting this installation project. Refer to the diagram provided by the manufacturer for further installation instructions.

Fixes these symptoms

Door won’t close
Little to no heat when baking
Oven is too hot
See more...

Installation Instructions

Stella from Charlotte, TN

worn out door seal

removed old clips and remaining parts of old seal...new part already had clips attached, so just snapped them into holes in oven door. Read more...

Your Price

$127.07

Jenn-Air Range Oven Door Seal

★★★★★

5 Reviews

PartSelect Number PS11757564

Manufacturer Part Number WPY702338

This oven door seal prevents heat from escaping the oven cavity when in use.

Fixes these symptoms

Little to no heat when baking
Oven not heating evenly
See more...

Installation Instructions

Paul from Mickleton, NJ

The oven door seal was ripped and was leaking.

The oven seal replacement was very straight forward. Two screws held the door to the arms coming from the oven. I slid the door up off the arm and moved it to a workbench. This whole process should take about 15 minutes, a little longer if your unit is older and you want to clean as you go. Mine was fairly dirty and I gave it a cleaning as I removed parts. Unscrew all screws on the outer frame of the door, including two small ones on the side. Remove the outer frame and then the glass front and set them aside. A few more screws to remove the glass from the inner door, and even more on the remaining part of the door. You should also remove the screws holding the tiny brackets as well to release the portion that holds the oven seal in place. This is very straightforward, just keep pulling screws out until you can remove the old seal.

Once the old seal is out, insert the new one using the wire embedded in the seal as your guide...the gap in the seal goes to the bottom. Put everything back together and re-install the door. My door hinges were spring loaded and took a little effort to move them down so the door can be slipped on. This is a two person job since the hinges do not lock in place, they spring right back up flush with the oven and you cannot install the door. Re-install the two set screws holding the door to the hinges and you are done!

With the new seal in place, it felt a little puffy and the door did not seem to close as flush as it used to. This makes sense since the seal is new. I kept the door locked (like you would to use the oven cleaning cycle). I even kept it partially locked during cooking.

Frankly, the hardest part was the cleanup of nasty grease and dirt that built up over the past decade or so.

Best of luck! Read more...

Videos!

Your Price

$102.70

Jenn-Air Range SEAL- DOOR

★★★★★

6 Reviews

PartSelect Number PS11743859

Manufacturer Part Number WP71001841

This oven door gasket prevents heat from escaping the oven cavity when in use. This is a very easy repair that should only take a few minutes. The door gasket may damage or rip over time due to repeated use. If you notice that hot air is escaping from your oven, it is likely that the gasket needs to be replaced. You will need to open the oven door and remove the old seal by pulling it out of place with your hands. The old gasket will be secured with clips that will come out when you pull the entire piece out. The new gasket will have hooks all along the rim, which will line up with the oven door. Simply line up the hooks and push into place outlining the door of the inside of the oven. No tools required.

Fixes these symptoms

Door won’t close
Oven not heating evenly
See more...

Installation Instructions

cheryl from dolores, CO

oven door gasket was no longer flexible, but stiff

pulled out the old door gasket, it had little diamond-shaped clips, pulled out really easily, replaced with the new gasket. All the clips fit into the proper holes, stuffed the new ends where the old ones were. Perfect. less than 10 minutes. Thanks.... Read more...