Burner would not heat

ApplianceGeneral Electric Range

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

David From Madera, CA

Aug 16, 2007

3 out of 6 people found this instruction helpful

First I made sure the electricity was off. Then, I flipped the burner up, and loosened the screwon the hinge. This allowed the burner to extend onto the cook surface. After loosening the clips holding the ceramic insulator together, the wires to the element were exposed. The wires were then transferred to the new burner element from their corresponding position on the old one. The new ceramic insulator was affixed over the wire with clips, and the hinge reattached. The chrome ring was worked over the burner, and the burner reseated in its proper cook poistion. Testing confirmed the burner to now work as new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Tilt Lock Hinge Mounted Surface Burner Kit - 6"

Part Number: PS244042

$29.16
In Stock

Trim Ring - 6"

Part Number: PS244475

$2.92
In Stock