Models > 107RHV786J

107RHV786J General Electric Range - Overview

Get Parts and Repair Help for 107RHV786J

If you know the range repair part you need, you can browse the list of all parts on the 107RHV786J, or you can search by name or part description. You can also find your part by where it is located on the 107RHV786J by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your range. We’ve also included any installation videos we have for 107RHV786J parts. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Sections of the 107RHV786J [Viewing 3 of 3]

$3.80

Drip Bowl - 6"

This six inch chrome drip bowl is intended for use with tilt lock style surface mount burner element units.

$2.92

Trim Ring - 6"

This 6 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

$3.71

Trim Ring - 8"

This 8 inch high rise burner trim ring is intended for use with detached style low rise tilt lock surface mount burners on ranges.

$6.00

Drip Bowl - 8"

This eight inch chrome drip bowl is intended for use with with tilt lock style surface mount burner element units.

$19.35

Broil Element

The depth of the screw-on terminals is 2-3/4 inches and they are 1-1/4 inches apart.

$22.41

Infinite Switch Kit

The infinite switch controls the stove top surface burner. This switch will work with most of the electrical range models with coil burner elements.

$1.34

Screws - Package of 12

$28.73

Tilt Lock Hinge Mounted Surface Burner Kit - 6"

This tilt lock hinge mounted surface element kit includes a 6 inch, three wire, 1350 watt surface element, and a terminal block with all three-wire units. These high rise elements do not come with an attached trim ring.

$4.41

Light Cover

$16.87

Broiler Pan - Large

Includes the pan and grate.

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Needed to replace Drip Pans and Trim Rings for old stove

  • Customer: Cynthia from Tampa FL
  • Difficulty: Really easy
  • Time to Complete: Less than 15 mins
  • Tools Required:
  • 17 of 20 people found this instruction helpful
Repair was simple (just lift off the old and put on the new). What was pleasantly surprising was how quickly I received the parts (amazing)!

Lastly, I've been looking for the correct parts/sizes in stores for years (yes, I should have tried this sooner). I was delighted to finally find a place that actually had the correct parts. read more

Large burner would operate on high setting only.

  • Customer: Ernest from Bellevue NE
  • Difficulty: Really easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Pliers, Socket set
  • 10 of 12 people found this instruction helpful
1. Removed the back panel.
2. Disconnected the wires from the old switch while connecting wires to the new switch one at a time.
3. Installed the new switch and broke off the excess metal on the post which fits into the burner knob on front of the range.
4. Replaced the burner knob and replaced the back panel. read more

Broiler Element Burned Out

  • Customer: Richard from Vestal NY
  • Difficulty: Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Nutdriver, Screw drivers, Socket set, Wrench set
  • 9 of 10 people found this instruction helpful
Successful repair to Our GE range, manufactured prior to 1965 (when installed in house). Pulled range from wall, unplugged, removed burned-out broiler element. Previous check with GE to make cross reference of range part number to Part-select part number for this nearly 50-year-old range. Obtained new part and installed. Works. Range has self-cleaning oven, ... read more