Motor runs, no motion at the business end of the mixer.

ApplianceKitchenAid Mixer


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Screw drivers
Socket set

Robert J From Stephenson, MI

Oct 24, 2013

Took the mixer down to the gear box. Found the plastic drive gear had a few stripped teeth. Did a search on the internet for the mixer gear. Found a couple of suppliers. Ordered the needed gear, pin and a bearing block just in case it was worn. The bearing block did not need to be replaced. Cleaned the broken off teeth from the gear grease and put the mixer back together. All worked fine when I plugged it in.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability


Part Number: PS734231

In Stock

Groove Pin

Part Number: PS734234

In Stock

Worm Gear

Part Number: PS1491159

In Stock