11746934-1-M-Whirlpool-WP9705444-Retaining Pin
Part Location Diagram of WP9705444 Whirlpool Retaining Pin
See part 18 in the diagram
( Grid squares measure 1x1 inch )
11746934-1-S-Whirlpool-WP9705444-Retaining Pin 11746934-2-S-Whirlpool-WP9705444-Retaining Pin Part Location Diagram of WP9705444 Whirlpool Retaining Pin
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.com

Retaining Pin WP9705444

★★★★★
★★★★★
4 Reviews

Rated by 4 customers 

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 9.03
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11746934
Manufacturer Part Number WP9705444
Manufactured by Whirlpool
Product Description

Retaining Pin Specifications

Used with Stand Mixers.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part works with the following products:
Mixer.
This part works with the following products:
KitchenAid, Whirlpool.
Part# WP9705444 replaces these:
9705444
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
4 Reviews
4.0
Filter By Rating:
  • 5 Stars
    3
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Harold W - May 3, 2023
  Verified Purchase
Worked great…
The parts I ordered, gave new life to a 28 year old mixer… Thank you
★★★★★
★★★★★
Ray B - May 22, 2020
  Verified Purchase
Pin for mixer
Right part first time. Worked as a pin should work.
★★★★★
★★★★★
Robert G - August 14, 2018
  Verified Purchase
Wrong part
The part did not fit and was the wrong part.
PartSelect logo
August 15, 2018
Hello, Thank you for leaving a review on the part ordered. I have sent you an email in regards to the order. Hope to hear from you!
★★★★★
★★★★★
Leonard B - February 28, 2018
  Verified Purchase
repair of broken worm gear and retaining pin
This was an amazing experience. My Kitchen Aid which is at least 15 years old stopped working. Part Select provided a 10 minute video explaining the most common cause of the problem, the broken worm gear and how to fix it. With the help of the video, the entire process, including taking the mixer apart, installing the new gear and putting it back together again took less than 30 minutes. And to find out that Part Select sells the parts as well. Total cost was $15 dollars including shipping. If only this kind of process happened more often.
  • 1
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 4 reviews. What's this?
Sort by:
  • 1
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Pin was missing therefore no mixing function
Place Pin in hole where it was missing then gently tap pin into place
Run a test and all is good ??
make sure to use a drift pin set
Tom
  • Thomas from COLUMBIA, NJ
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced worn out gear
Fairly easy if you have done it once before.
Other Parts Used:
Worm Gear Retaining Pin
  • Richard from SUQUAMISH, WA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
planetary gear would not turn; discovered worm gear was broken upon dis-assembly of mixer
Followed step-by-step video instructions for dis-assembly/reassembly found at ereplacementparts.com. All went well except when driving out the pin that holds the worm gear in the tower. The video wasn't exactly clear enough about what position the pin should be in when driving it out and I inadvertently drove the pin out so that it was trapped inside the tower assembly. Result? I had to bend the pin to get it out, causing an extra expenditure and wait time to order a new pin. So, lesson learned: be sure the pin is horizontal to the tower and not perpendicular to when driving the pin out. Also, I found that having the mixer apart was a good time to replace the grease in the housing. I don't think it would be required to replace the grease at this time but I was worried that pieces of the old worm gear could remain in the grease and possible get jammed in the gears after repairs were completed. Be sure to get a "food grade" grease not grease from your local auto parts store! The table knife was the best tool to use to remove the grease and to smear the grease all over the internal gears when replacing it.
Read less
Other Parts Used:
Worm Gear Retaining Pin
  • David from GREENWOOD, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
mixer would not turn
removed the screws holding the mixer housing and then removed the worn worm gear by removing the roll pin holding it on the shaft. Replaced the worm gear and inserted the pin that hole it in place. Replaced some of the gear grease and reassembled mixer. Went very easily. No problems at all.
Other Parts Used:
Worm Gear Retaining Pin
  • James from Wewahitchka, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
5 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Back to Top
Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top
You May Also Need ?
Shaft & Pinion (10T)
$14.30
$14.30
  In Stock
Transmission Case Gasket
$20.48
$20.48
  In Stock
Retaining Pin
$9.03
$9.03
  In Stock
Worm Gear
$20.99
$20.99
  In Stock
Back to Top
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11746934
Manufacturer Part Number: WP9705444
Brand
Model Number
Description
KitchenAid
3K45SS
Mixer
KitchenAid
3K5SS
Mixer
Whirlpool
3KSM150PSTAQ0
Mixer
Whirlpool
3KSM150PSTBM0
Mixer - Stand Mixer
KitchenAid
3KSM150PSTBW0
Mixer - MIXER
KitchenAid
3KSM150PSTCB0
Mixer - MIXER
KitchenAid
3KSM150PSTCL0
Mixer - MIXER
KitchenAid
3KSM150PSTCU0
Mixer - MIXER
Whirlpool
3KSM150PSTDR0
Mixer
KitchenAid
3KSM150PSTDR5
Mixer - Model # 3ksm150pstdr5 Official Kitchenaid Stand Mixer
KitchenAid
3KSM150PSTER0
Mixer - MIXER
KitchenAid
3KSM150PSTER5
Mixer - Model # 3ksm150pster5 Official Kitchenaid Stand Mixer
KitchenAid
3KSM150PSTGA0
Mixer - MIXER
Whirlpool
3KSM150PSTIC0
KitchenAid
3KSM150PSTIC5
Mixer - Model # 3ksm150pstic5 Official Kitchenaid Stand Mixer
Whirlpool
3KSM150PSTLR0
Mixer
Whirlpool
3KSM150PSTMH0
Mixer - Stand Mixer
KitchenAid
3KSM150PSTMY0
Mixer - MIXER
KitchenAid
3KSM150PSTOB0
Mixer - MIXER
Whirlpool
3KSM150PSTPA0
Mixer - Stand Mixer
KitchenAid
3KSM150PSTPA5
Mixer - Model # 3ksm150pstpa5 Official Kitchenaid Stand Mixer
Whirlpool
3KSM150PSTPK0
KitchenAid
3KSM150PSTTG0
Mixer - MIXER
Whirlpool
3KSM150PSTVB0
Mixer - Stand Mixer
KitchenAid
3KSM150PSTWH0
Mixer - MIXER
Whirlpool
3KSM150PSTWM0
Mixer
KitchenAid
3KSM5CBTER0
Mixer - MIXER
KitchenAid
3KSM5CBTWH0
Mixer - MIXER
Whirlpool
3KSM95TCZ0
Mixer
Whirlpool
3KSM95TWH0
Back to Top
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service
Retaining Pin
$ 9.03
  In Stock
✖
Stock Status
 In Stock

Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.

If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.

 On Order

Item is not in stock and usually ships 3-5 business days from the time you place your order.

 Special Order

Item is not in stock and usually ships 10-15 business days from the time you place your order.

 NLA - No Longer Available

This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.