Ignitor glowed but the gas valve would not allow gas to flow to the burner

ApplianceGeneral Electric Oven

Modeljgbcz20

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools Nutdriver

John From Round Lake Heights, IL

Jan 30, 2013

out of people found this instruction helpful

Since the igniter was old, it was weak and was not drawing enough amperage. This resulted in the gas valve not to get energized. I only had to unscrew the igniter from the burner and remove the little plate in the back of the oven wall that covered the hole that the wires went through. Then I was able to pull the connector out of the hole to disconnect it. Then it was just a matter of reversing the process to attatch the new igniter.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Flat Style Oven Igniter Kit

Part Number: PS231280

$35.87
In Stock