The cam dogs were making a noise and slipping

ApplianceWhirlpool Washer


Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers
Socket set

Paul From Charlestown, IN

Jan 02, 2013

The only thing that made this job hard was that I had a difficult time separating the upper and lower agitator. I am a big fellow and all the pulling and prying would not make them separate. I finally got them apart after using my Dremel tool on the cam housing. It appeared to me that it had been glued down to the lower agitator at the factory as this was the first time I ever replaced these parts. Should be easy to replace the parts next time though. I would suggest purchasing another rubber washer for the single bolt. It split on me when I tightened it down. The trust spacer didn't appear to be worn at all and I could have reused the old one. The parts appeared to be OEM and they fit perfectly. The delivery time was very quick as well.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Agitator Cam Kit

Part Number: PS334648

In Stock

Thrust Spacer

Part Number: PS350853

In Stock