The fuse was found blown.

ApplianceWhirlpool Dishwasher

ModelDu1055xtps3

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools

Ramon From Greer, SC

Jan 25, 2012

0 out of 2 people found this instruction helpful

I found the problem when I found one of the torque screw partially out. The door was not closing properly. The heat blow the fuse. I removed the head were the control board is found and replaced it with the new kit. When you add the new fuse kit. It is needed to cut the old wire from the old fuse and adapt the new wire harness by stripping the wire . Then screw the wire tight to the adapter. And it's done. Also make sure to test the cycle of the dishwasher ,by timing it. All came out good. It's operational.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Fuse Kit

Part Number: PS774514

$16.46
In Stock