No hot water coming into the clothes washer

ApplianceKitchenAid Washer


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers

Larry From St. Louis, MO

Oct 18, 2011

0 out of 3 people found this instruction helpful

I looked at the PartSelect video first. It was a tremendous help. I removed the two screws on the right and left front corners of the console and tilted back the console. I disconnected a small electrical plug on the top panel and removed two large metal clips under the console fastening the back panel to the top of the machine. I then slid the one-piece front, side, and top panels away from the back to reveal the inside of the machine (tub, motor, etc.). I then removed the old water valve (combined hot and cold water) from the back panel and instaled the new one, using the mounting plate. I then replaced the cover and reversed the procedure above, finally reinstalling the two screws on the console. The new water valve works perfectly!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Inlet Valve with Mounting Bracket

Part Number: PS334646

In Stock